1/8
www.rohm.com
2009.06 - Rev.A
© 2009 ROHM Co., Ltd. All rights reserved.
System
Lens
Driver
Series
for
Digital
Still
Cameras
/
Single-lens
Reflex
Cameras
1 to 2ch Lens Drivers
for Single-Lens Reflex Cameras
BD6735FV, BD6736FV
●Description
The BD6735FV motor driver provides 2 Full-ON Drive H-bridge channels, while BD6736FV provides 1 Full-ON Drive H-bridge
channel. ROHM’s lens driver series features high voltage resistance and large current output in a compact surface mount
package, making it ideally suited for smaller systems such as Single-Lens Reflex with Interchangeable Lenses.
●Features
1) Low ON-Resistance Power MOS output: Full-ON Drive block with 1.0Ω Typ. (BD6735FV)
Full-ON Drive block with 0.35Ω Typ. (BD6736FV)
2) DMOS output allowing a range power supply: 2.0V to 8.0V (BD6735FV), 2.0V to 9.0V (BD6736FV)
3) Built-in step-up circuit for the DMOS gate voltage drive
4) Drive mode switching function
5) H bridge maximum output current: DC maximum 1.0A (BD6735FV and BD6736FV), Peak maximum 3.2A (BD6736FV)
6) UVLO (Under Voltage Lockout Protection) function
7) Built-in TSD (Thermal Shut Down) circuit
8) Standby current consumption: 0μA Typ.
●Absolute Maximum Ratings
Parameter Symbol
Limit
Unit
BD6735FV BD6736FV
Power supply voltage VCC -0.5 to +10.0 -0.5 to +10.0 V
Motor power supply voltage VM -0.5 to +10.0 -0.5 to +10.0 V
Charge pump step-up power supply voltage VBST -0.5 to +15.0 -0.5 to +15.0 V
Control input voltage VIN -0.5 to VCC+0.5 -0.5 to VCC+0.5 V
Power dissipation Pd 810
※
1
810
※
1
mW
Operating temperature range Topr -30 to +75 -30 to +75 ℃
Junction temperature Tjmax +150 +150 ℃
Storage temperature range Tstg -55 to +150 -55 to +150 ℃
H-bridge output current (DC) Iout -1000 to +1000
※
2
-1000 to +1000
※
2
mA/ch
H-bridge output current (Peak) Ipeak - -3200 to +3200
※
3
mA/ch
※1 Reduced by 6.48mW/°C over 25℃, when mounted on a glass epoxy board (70mm 70mm 1.6mm).
※2 Must not exceed Pd, ASO, or Tjmax of 150℃
※3 Peak=100msec
●Operating Conditions (Ta=-30 to +75℃)
Parameter Symbol
Limit
Unit
BD6735FV BD6736FV
Power supply voltage VCC 2.0 to 8.0 2.0 to 9.0 V
Motor power supply voltage VM 2.0 to 8.0 2.0 to 9.0 V
Control input voltage VIN 0 to VCC 0 to VCC V
Logic input frequency FIN 0 to 100 0 to 100 kHz
Min. logic input pulse width TIN 0.5 0.5 μs
No.09014EAT03