LIGHTLINE
AC/DC-Converter
with 5 year Warranty
RACD30
30 Watt PFC
Single
Output
● 30W Class II AC-DC LED Power Supply
● 500mA or 700mA Constant Current
● Drives 3 - 15 High brightness LEDs
● Active Power Factor Correction >0.95
● Fused Input, Protected Output
● 3kVAC Isolation
● UL-8750 Certified
● Output Connector to avoid miswiring
● Low Cost
● Long 5 Year Warranty
Features
LED
DRIVER
Selection Guide
Part Input Voltage Input Current Output Output Max
Number Range at full load Voltage Range Current #
(VAC) (mA) (VDC) (mA) LEDs
RACD30-500 universal 390 10-56 500 15 x 2W
RACD30-700 universal 390 10-43 700 12 x 3W, 12+12 x 1W
Input Voltage Range Standard 90-264VAC
Rated Power 30 Watts max.
Input Frequency Range 47-63 Hz
Power Factor Full Load, 115VAC/230VAC 0.9
THD Full Load, 115VAC 13% max.
Full Load, 230VAC 11% max.
Open Circuit Voltage 500mA Version 58VDC
(Zener Clamp) 700mA Version 48VDC
Inrush Current (<2mS) 115VAC/230VAC 10A max.
Input Current 230VAC, Full Load 390mA typ.
Leakage Current 115VAC/240VAC - 60/50Hz 0.5mA typ.
Input Fuse Standard T1A
Output Current Accuracy (combined Tolerance, load Regulation and Line Regulation) ±10%
Minimum Load Open Circuit Protected 3 LEDs
Hold Up Time 18ms min.
Operating Frequency 40 - 100 kHz typ.
Efficiency at Full Load 85%
RMS Isolation Voltage (input to output) 3kVAC / 1 minute
Temperature Coefficient ±0.02%/°C typ.
Overload Protection 120% typ.
Short Circuit Protection Continuous Current Limit
Output Overvoltage Protection 500mA Version 56V Zener Diode Clamp
700mA Version 43V Zener Diode Clamp
Overtemperature Protection Shutdown, Automatic restart after cooling down
Operating Temperature Range Ambient Temperature -20°C to +50°C
(free air convection) Case Temp. 85°C max. (500mA version: 90°C max.)
Storage Temperature Range -40°C to +100°C
Weight 200g
Packing Quantity 1pcs
continued on next page
Description
Specifications
(typical at 25°C and after warm up time unless otherwise specified )
A compact 30W constant current switching power module suitable for driving up to 15 high power LEDs (Vf = 3.6V).
The output current is fixed at 500mA or 700mA. Active power factor correction is standard.
This series features both screw terminal and socket output connections. The socket connecter avoids the possibility
of miswiring and damaging the LED load if the LEDs are preassembled into a wiring harness or lamp fitting.
UL-8750 Certified
EN 61347 Certified
E340696
RoHS
2011/65/EU
6/6
Refer to Application Notes
L-42 www.recom-power.comREV: 0/2015