ELG-75-C700DA Datasheet ELG-75-C700A, ELG-75-C1050B, ELG-75-C1050DA | P1-P3

60~75W Constant Current Mode LED Driver

ELG-75-C series

■ Features ■ Applications

■ Model Encoding

- C500ELG -

Output wattage

Series name

■ Description

ELG-75-C series is a 75W LED AC/DC driver featuring the constant current mode and

high voltage output. ELG-75-C operates from 100~305VAC and offers models with different

rated current ranging between 350mA and 1400mA. Thanks to the high efficiency up to 91%,

with the fanless design, the entire series is able to operate for -40 ~+85 case temperature under℃℃

free air convection. The design of metal housing and IP67/IP65 ingress protection level allows

this series to fit both indoor and outdoor applications. ELG-75-C is equipped with various function

options, such as dimming methodologies, so as to provide the optimal design flexibility for LED

lighting system.

Constant Current mode output

Metal housing design with functional Ground

Built-in active PFC function

 <0.5WNo load / Standby power consumption

IP67 / IP65 rating for indoor or outdoor installations

Function options: output adjustable via potentiometer;

3 in 1 dimming (dim-to-off); Smart timer dimming; DALI

Typical lifetime>50000 hours

5 years warranty

LED street lighting

LED harbor lighting

LED bay lighting

LED greenhouse lighting

LED flood lighting

Type HL for use in Class I, Division 2

(Classified) location.hazardous

Rated output current (350/500/700/1050/1400mA)

Function options

Type

Blank

IP Level

IP67

IP65

IP67

Io fixed.

Io adjustable through built-in potentiometer.

3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance)

Function Note

In Stock

110

IP67

IP65

Type HL

(for DA-Type only)

IP67

DALI control technology.

Built-in Smart timer dimming function by user request.

Built-in Smart timer dimming and programmable function.

In Stock

By request

In Stock

File Name:ELG-75-C-SPEC 2018-05-29

Input wiring type

Blank:2-wire input for standard model

{

3Y:3-wire input for standard model

IS 15885(Part 2/Sec13)

R-41027766

THOMAS SAMUEL

(for 700A/1050Aonly)

AB IP65

Io adjustable through built-in potentiometer &

3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance)

In Stock

60~75W Constant Current Mode LED Driver

ELG-75-C series

SPECIFICATION

MODEL

RATED CURRENT

RATED POWER

Note.5

OUTPUT

CURRENT ADJ. RANGE

SET UP TIME

Note.4

VOLTAGE RANGE Note.3

FREQUENCY RANGE

POWER FACTOR

(Typ.)

EFFICIENCY (Typ.)

AC CURRENT(Typ.)

INPUT

INRUSH CURRENT

(Typ.)

LEAKAGE CURRENT

SAFETY STANDARDS

EMC IMMUNITY

WORKING TEMP.

WORKING HUMIDITY

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

MTBF

DIMENSION

OTHERS

NOTE

PACKING

OVER TEMPERATURE

OVER VOLTAGE

500ms/115VAC,230VAC

(Please refer to "STATIC CHARACTERISTIC" )

section

47 ~ 63Hz

PF 0.97/115VAC, PF 0.95/230VAC, PF 0.92/277VAC@full load≧≧≧

(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)

0.7A / 115VAC 0.45A / 230VAC 0.38A/277VAC

<0.75mA / 277VAC

Compliance to

EN55015,EN61000-3-2 Class C (@load 50%) ; EN61000-3-3;≧ GB17743, GB17625.1

;EAC TP TC 020

20 ~ 95% RH non-condensing

-40 ~ +80 , 10 ~ 95% RH℃

±℃ ℃0.03%/ (0 ~ 60 )

10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

180 6* 3*35.5 mm (L*W*H)

ENVIRONMENT

EMC EMISSION

SAFETY &

EMC

PROTECTION

225 ~ 260V

Shut down o/p voltage, re-power on to recover

SHORT CIRCUIT

91%

107 ~ 214V

ELG-75-C350

ELG-75-C700

Hiccup mode, recovers automatically after fault condition is removed

175 ~ 350mA

350 ~ 700mA

350mA

74.9W

I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃

WITHSTAND VOLTAGE

ISOLATION RESISTANCE

90%

115 ~ 140V

53 ~ 107V

700mA

74.9W

ELG-75-C1050

525 ~ 1050mA

90%

80 ~ 100V

35 ~ 71V

1050mA

74.55W

CURRENT TOLERANCE

±5.0%

160 ~ 190V

91%

75 ~ 150V

ELG-75-C500

250 ~ 500mA

500mA

75W

ELG-75-C1400

700 ~ 1400mA

90%

64 ~ 79V

27 ~ 54V

1400mA

75.6W

CONSTANT CURRENT REGION

Note.2

THD< 20%(@load 50%/115VC,230VAC; @load 75%/277VAC)≧≧

(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)

TOTAL HARMONIC DISTORTION

OPEN CIRCUIT VOLTAGE

(max.)

224V

114V

78V

158V

61V

Adjustable for A/AB-Type only (via built-in potentiometer)

COLD START 50A(twidth= s measured at 50% Ipeak)/230VAC350 Per NEMA 410μ;

MAX. No. of PSUs on 16A

CIRCUIT BREAKER

5 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC

Tcase=-40 ~ +85 (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)℃

MAX. CASE TEMP.

Tcase=+85℃

Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level(surge immunity:Line-Earth:6KV,Line-Line:4KV)

;EAC TP TC 020

1. All parameters NOT specially mentioned are measured at 230VAC input, rated and 25 of ambient temperature.current ℃

2. Please refer to "DRIVING METHODS OF LED MODULE".

3. De rating may be needed under low input voltages. Please .- refer to STATIC CHARACTERISTIC sections for details

4. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.

5. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the

complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

6. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 80 or less.℃

7. Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com

8.The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃

0.8Kg;16pcs/13.4Kg/0.67CUFT

CURRENT RIPPLE 5.0% max. @rated current

100 ~ 305VAC 142 ~ 431VDC

No load power consumption <0.5W for Blank / A / Dx / D2-Type

NO LOAD / STANDBY

POWER CONSUMPTION

Standby power consumption <0.5W for B / AB / DA -Type

UL8750 independent, EN62384;(type”HL”), CSA C22.2 No. 250.13-12;EN/AS/NZS 61347-1, EN/AS/NZS 61347-2-13

;IP65 or IP67; approvedGB19510.1, GB19510.14EAC TP TC 004;BIS IS15885(for 700A/1050A only)

1171.4K hrs min. Telcordia SR-332 (Bellcore) 305Khrs min. MIL-HDBK-217F (25 )℃

DALI STANDARDS Compliance to IEC62386-101, 102, 207 for DA-Type only

60W

59.85W

59.5W

60.2W

200VAC ~ 305VAC

100VAC ~ 180VAC

File Name:ELG-75-C-SPEC 2018-05-29

60~75W Constant Current Mode LED Driver

ELG-75-C series

BLOCK DIAGRAM

DETECTION

PWM & PFC

CIRCUIT

O.L.P.O.T.P.

EMI FILTER

RECTIFIERS

POWER

SWITCHING

FILTER

RECTIFIERS

Vo+

Vo-

I/P

CONTROL

O.V.P.

O.L.P.

PFC

CIRCUIT

PFC fosc : 50~120KHz

PWM fosc : 60~130KHz

DIM+

(B Type)

DIM-

DRIVING METHODS OF LED MODULE

※ This series works in constant current mode to directly drive the LEDs.

Typical output current normalized by rated current (%)

In the constant current region, the highest voltage at the output of the driver

depends on the configuration of the end systems.

Should there be any compatibility issues, please contact MEAN WELL.

100

(min.)

Vo(%)

100

Io(%)

Constant

Current area

Hiccup

Protection

CASE :Protective Earth

File Name:ELG-75-C-SPEC 2018-05-29

P1-P3 P4-P6 P7-P9 P10-P11

ELG-75-C700DA

Mfr. #:

Buy ELG-75-C700DA

Manufacturer:

MEAN WELL

Description:

LED Power Supplies 700mA 53-107V 74.9W IP67 DALI function

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

ELG-75-C700DA

ELG-75-C700DA

Products related to this Datasheet