OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HMCAD1041-80

P1-P3P4-P6P7-P9P10-P12
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
978-250-3343 tel • 978-250-3373 fax • Order On-line at www.hittite.com
Application Support: apps@hittite.com
A / D CONVERTERS - SMT
0
0 - 4
HMCAD1041-80
v01.0411
SINGLE 10-BIT 65/80 MSPS
A/D CONVERTER
AC Electrical Specications - 80 MSPS
AVDD=1.8V, DVDD=1.8V, DVDDCK=1.8V, OVDD=2.5V, FS=80MSPS clock, 50% clock duty cycle, -1dBFS 8MHz input signal, unless otherwise noted.
Parameter Condition Min Typ Max Unit
Performance
SNR Signal to Noise Ratio
F
IN
= 8 MHz 60 61.6 dBFS
F
IN
= 20 MHz 61.2 dBFS
F
IN
= 30 MHz 61.3 dBFS
F
IN
=~ FS/2 61.3 dBFS
SNDR Signal to Noise and Distortion Ratio
F
IN
= 8 MHz 60 61.3 dBFS
F
IN
= 20 MHz 60.7 dBFS
F
IN
= 30 MHz 61 dBFS
F
IN
=~ FS/2 59 dBFS
SFDR Spurious Free Dynamic Range
F
IN
= 8 MHz 70 75 dBc
F
IN
= 20 MHz 75 dBc
F
IN
= 30 MHz 75 dBc
F
IN
=~ FS/2 65 dBc
HD2 Second order Harmonic Distortion
F
IN
= 8 MHz -80 -90 dBc
F
IN
= 20 MHz -95 dBc
F
IN
= 30 MHz -90 dBc
F
IN
=~ FS/2 -80 dBc
HD3 Third order Harmonic Distortion
F
IN
= 8 MHz -70 -75 dBc
F
IN
= 20 MHz -75 dBc
F
IN
= 30 MHz -75 dBc
F
IN
=~ FS/2 -65 dBc
ENOB Effective number of Bits
F
IN
= 8 MHz 9.7 9.9 bits
F
IN
= 20 MHz 9.8 bits
F
IN
= 30 MHz 9.8 bits
F
IN
=~ FS/2 9.5 bits
Power Supply
Analog supply current 16.5 mA
Digital supply current Digital core supply 3.3 mA
Output driver supply 2.5V output driver supply, sine wave input, F
IN
= 1 MHz, CK_EXT enabled 5.9 mA
Output driver supply 2.5V output driver supply, sine wave input, F
IN
= 1 MHz, CK_EXT disabled 4.1 mA
Analog power Dissipation 29.7 mW
Digital power Dissipation OVDD = 2.5V, 5pF load on output bits, F
IN
= 1 MHz, CK_EXT disabled 16.2 mW
Total power Dissipation OVDD = 2.5V, 5pF load on output bits, F
IN
= 1 MHz, CK_EXT disabled 45.9 mW
Power Down Dissipation 9.1 µW
Sleep Mode Power Dissipation, Sleep mode 18.3 mW
Clock Inputs
Max. Conversion Rate 80 MSPS
Min. Conversion Rate 3 MSPS
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
978-250-3343 tel • 978-250-3373 fax • Order On-line at www.hittite.com
Application Support: apps@hittite.com
A / D CONVERTERS - SMT
0
0 - 5
HMCAD1041-80
v01.0411
SINGLE 10-BIT 65/80 MSPS
A/D CONVERTER
Digital and Timing Specications
AVDD=1.8V, DVDD=1.8V, DVDDCK=1.8V, OVDD=2.5V, Conversion Rate: Max specied, 50% clock duty cycle, -1dBFS input signal, 5 pF capacitive
load on data outputs, unless otherwise noted
Parameter Condition Min Typ Max Unit
Clock Inputs
Duty Cycle 20 80 % high
Compliance CMOS, LVDS, LVPECL, Sine Wave
Input range Differential input swing 0.4 Vpp
Input range Differential input swing, sine wave clock input 1.6 Vpp
Input common mode
voltage
Keep voltages within ground and voltage of OVDD 0.3 V
OVDD
-0.3 V
Input capacitance Differential 2 pF
Timing
T
PD
Start up time from Power Down Mode to Active Mode 900
clock
cycles
T
SLP
Start up time from Sleep Mode to Active Mode 20
clock
cylcles
T
OVR
Out of range recovery time 1
clock
cycles
T
AP
Aperture Delay 0.8 ns
Єrms Aperture jitter < 0.5 ps
T
LAT
Pipeline Delay 12
clock
cycles
T
D
Output delay (see timing diagram). 5pF load on output bits 3 10 ns
T
DC
Output delay relative to CK_EXT (see timing diagram) 1 6 ns
Logic Inputs
V
HI
High Level Input Voltage. V
OVDD
≥ 3.0V 2 V
V
HI
High Level Input Voltage. V
OVDD
= 1.7V – 3.0V 0.8 ·V
OVDD
V
V
LI
Low Level Input Voltage. V
OVDD
≥ 3.0V 0 0.8 V
V
LI
Low Level Input Voltage. V
OVDD
= 1.7V – 3.0V 0 0.2 ·V
OVDD
V
I
HI
High Level Input leakage Current ±10 µA
I
LI
Low Level Input leakage Current ±10 µA
C
I
Input Capacitance 3 pF
Logic Outputs
V
HO
High Level Output Voltage V
OVDD
-0.1 V
V
LO
Low Level Output Voltage 0.1 V
C
L
Max capacitive load. Post-driver supply voltage equal to pre-driver
supply voltage V
OVDD
= V
OCVDD
5 pF
C
L
Max capacitive load. Post-driver supply voltage above 2.25V
(1)
10 pF
(1) The outputs will be functional with higher loads. However, it is recommended to keep the load on output data bits as low as possible
to keep dynamic currents and resulting switching noise at a minimum
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
978-250-3343 tel • 978-250-3373 fax • Order On-line at www.hittite.com
Application Support: apps@hittite.com
A / D CONVERTERS - SMT
0
0 - 6
HMCAD1041-80
v01.0411
SINGLE 10-BIT 65/80 MSPS
A/D CONVERTER
Timing Diagram
Figure 2: Timing Diagram
Absolute Maximum Ratings
Absolute maximum ratings are limiting values to be applied for short periods of time. Exposure to absolute maxi-
mum rating conditions for an extended period of time may reduce device lifetime.
Table 1:
Pin Pin Rating
AVDD VSS -0.3V to +2.3V
DVDD VSS -0.3V to +2.3V
AVSS, DVSSCK, DVSS, OVSS VSS -0.3V to +0.3V
OVDD VSS -0.3V to +3.9V
IP, IN, analog inputs and outputs VSS -0.3V to +2.3V
Digital outputs VSS -0.3V to +3.9V
CKP, CKN VSS -0.3V to +3.9V
Digital Inputs VSS -0.3V to +3.9V
Operating temperature -40 to +85 ºC
Storage temperature -60 to +150 ºC
Soldering Prole Qualication J-STD-020
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Stresses above those listed under Absolute Maximum
Ratings may cause permanent damage to the device. This
is a stress rating only; functional operation of the device
at these or any other conditions above those indicated in
the operational section of this specication is not implied.
Exposure to absolute maximum rating conditions for
extended periods may affect device reliability.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
P1-P3P4-P6P7-P9P10-P12

HMCAD1041-80

Mfr. #:
Buy HMCAD1041-80
Manufacturer:
Analog Devices Inc.
Description:
IC ADC 10BIT PAR 65/80M 40-QFN
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet