SENSOR DESCRIPTION
The CHR70M is a high resolution CMOS image sensor with
10000 by 7096 pixels. The image array consists of
3.1µm x 3.1µm pinned diode pixels, which share a number
of transistors (2 pixels sharing). The image sensor has 8
analog outputs, each running at 30MHz resulting in a
frame rate of 3fps at full resolution. Higher frame rates
can be achieved in windowing mode or subsampling
mode. The image sensor also integrates a programmable
gain amplifier and offset regulation. These and other
settings are all programmable using the SPI interface.
A programmable on-board sequencer generates all inter-
nal exposure and read out timings. External triggering
and exposure programming is also possible.
APPLICATION FIELDS
• Ultra high resolution imaging
• Document scanning
• Flat panel, PCB inspection
• Areal photography
SENSOR FEATURES
• Electronic rolling shutter
• 10000 (H) x 7096 (V) active pixels on a 3.1µm pitch
• 3 frames/sec at full resolution
• ROI capability - moving window functionality
• Master clock 30MHz
• 8 analog outputs @ 30MHz
• On-chip timing generation
• SPI-control
• 3.3V signaling
• Monochrome and Bayer (RGB) configuration
• Ceramic PGA package (65 pins)
• 2 sided AR-coated cover glass lid
CHR70M
70MP ultra high resolution image sensor
Please address all product inqueries and ordering information to:
CMOSIS · Coveliersstraat 15 · B-2600 Antwerpen · Phone: +32 3 260 17 33 · Fax: +32 3 260 17 79 · info@cmosis.com
