1
Non resettable fuses
OMT
www.schurter.com /PG01_2
Fuses
Surface Mount Fuse, 11 x 4.6 mm, Time-Lag T, 250 VAC, 125 VDC
Exemplary part photo depending on
part no.
UL 248-14 · 250 VAC · 125 VDC · Time-Lag T
Description
- Directly solderable on printed circuit boards
Standards
- UL 248-14
- CSA C22.2 no. 248.14
Approvals
- UL File Number: E41599
- CSA File Number: 51172
Applications
- Primary protection on SMD PCBs
- AC and DC applications
References
Packaging Details
Weblinks
pdf datasheet, html-datasheet, General Product Information, Packaging
details, Approvals, CE declaration of conformity, RoHS, CHINA-RoHS,
REACH, Distributor-Stock-Check, Detailed request for product
Technical Data
Rated Voltage 125 - 250 VAC, 125 VDC
Rated current 0.75 - 5 A
Breaking Capacity 50 A - 100 A
Characteristic Time-Lag T
Mounting PCB,SMT
Admissible Ambient Air Temp. -40 °C to 125 °C
Climatic Category 40/125/21 acc. to IEC 60068-1
Material: Housing Thermoplastic, UL 94V-0
Material: Terminals Tin-Plated Copper Alloy
Unit Weight 0.04 g
Storage Conditions 0 °C to 40 °C, max. 70% r.h.
Product Marking , Type, Rated current, Approvals
Soldering Methods Reflow, Wave
Soldering Profile
Solderability 245 °C / 3 sec acc. to IEC 60068-2-58,
Test Td
Resistance to Soldering Heat 260 °C / 10 sec acc. to IEC 60068-2-58,
Test Td
Moisture Resistance Test MIL-STD-202, Method 106E
(50 cycles in a temp./mister chamber)
Terminal Strength MIL-STD-202, Method 211A
(Deflection of board 1 mm for 1 minute)
Thermal Shock MIL-STD-202, Method 107D
(200 air-to-air cycles from -55 to
+125°C)
Case Resistance acc. to EIA/IS-722, Test 4.7
>100 MΩ (between leeds and body)
Mechanical Shock MIL-STD-202, Method 213B
(Shock 50g, half sine wave, 11 ms)
Vibration, High Frequency MIL-STD-202, Method 204D
Shock 20 gn, 20 min, 10-2 kHz, 12 cyc.
Resistance to Solvents MIL-STD-202, Method 215A
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in
General Product Information
