AWG#
22-28
AWG#
Ins. Dia. Pcs/Reel
22-28
Ø1.0~Ø1.5 12,000
Housing
Contact
Housing
Contact
PIN SIZE A (mm) LENGTH
2P, 3P, 4P 28.85
6P 29.05
NOTE: Waterproofing Cap is installed at the wire seal end to cover the unused holes.
Part No
Ø1.25 to
Ø1.50
Orange
566-200-100
566-290-711
566-290-721
Female Contact (Socket)
Part No
566-290-721
Light Blue
PCB
Header
PBT with Glass, UL 94V-0
Brass
Contact Plating Tin Plating
Wire & Housing Seals Silicone Rubber
Waterproofing Cap PBT, UL 94V-0 Applicable Contact
Ø1.00 to
Ø1.25
Crimp &
Poke
PBT, UL 94V-0
Phosphor Bronze
Contact Resistance
10 mΩ
Insulation Resistance
1000 MΩ min./DC500V
Temperature Range -40°C to +105°C
PCB Thickness 1.6mm
Withstanding Voltage 1000V AC (rms)
No. of Positions 2, 3, 4, or 6P Male Contact (Pin)
Pitch 2.0mm Part No
Rated Voltage 250V 566-290-711
Rated Current 2A max
SERIES:
566, WIRE TO WIRE
WIRE TO BOARD
566-002-000-710
NO. OF CONTACTS:
002 - 2 CONTACTS
003 - 3 CONTACTS
004 - 4 CONTACTS
006 - 6 CONTACTS
CONTACT CODE:
000 - NO CONTACTS (ONLY FOR CRIMP CONTACTS)
421 - BOARD MOUNT CONTACTS (PCB) ONLY FOR
2 & 3 PIN SIZE
STYLE:
701 - BLACK MALE HOUSING (ONLY FOR BOARD MOUNT CONTACTS)
710 - BLACK MALE HOUSING FOR WIRE INSULATION Ø1.00 TO Ø1.25
711 - BLACK MALE HOUSING FOR WIRE INSULATION Ø1.25 TO Ø1.50
810 - BLACK FEMALE HOUSING FOR WIRE INSULATION Ø1.00 TO Ø1.25
811 - BLACK FEMALE HOUSING FOR WIRE INSULATION Ø1.25 TO Ø1.50
SERIES 566
Ordering Code:
www.edac.net
Waterproofing Cap:
• 2.0mm Pitch, Rated Current: 2A max
• Fully Waterproof Solution available in 2, 3, 4, or 6
Positions (2 and 3 Positions Only for Wire to Board)
• Available in Wire-to-Wire and Wire-to-Board Options
• Seals preassembled into housing; no external sealing
required
• True Crimp and Poke Solution
• Waterproofing cap available to cover holes of wire seal
• Available with wire already installed
• Waterproof Grade IP67 Certified
Specifications:
Crimp Contact:
**Crimp Contacts are also available in strips of 60pcs.
Contact EDAC for more information.
Rear Gasket (Wire Seal):
Assembly Layout
A
Wire to Wire / Wire to Board 2.0mm Pitch
Waterproofing Cap
Materials:
**Wire seals and housing seals are already
pre-assembled in the connector.
Page 1