12 Watt Light Ring on
OptoTherm
®
Linear Heat
Spreader
OPA730 Series
© TT electronics plc
Issue C 09/2016 Page 1
OPTEK Technology, Inc.
1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200
www.optekinc.com | www.ttelectronics.com
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
Description:
The OPA730 Series are designed for areas where light output and reliability are essenƟal. The light beam angles of 40° and
120° are ideal for illuminaƟng small and medium size areas while requiring minimal space.
A High Performance Heat Spreader (HPHS) is used to ensure the best heat dissipaƟon of any light assembly in the industry.
OptoTherm
®
is designed to be the opƟmum material for distribuƟon of heat for high power devices.
For custom colors and design contact your OPTEK representaƟve.
Features:
• 12, 1 waƩ LEDs per ring
• Mono-color per ring (Blue, Green, Red, Yellow, White)
• Two component beam angle opƟons (120° or 40°)
• Universal connector (Tyco 2-292173-2 mates with 173977-2)
• RoHS Compliant
RoHS
DO NOT LOOK DIRECTLY AT LED WITH
UNSHIELDED EYES OR DAMAGE TO RETINA
MAY OCCUR.
OPA730_
OPA730_D
Part Number Typical Forward Voltage (V) Luminous Flux (lm) Beam Angle Color Dominant Wavelength
OPA730Y 15.0 420
120°
Yellow 587 nm
OPA730B 21.6 108 Blue 470nm
OPA730G 21.6 576 Green 530 nm
OPA730R 15.0 312 Red 625 nm
OPA730W 21.6 576 White 6500°K
OPA730YD 15.0 420
40°
Yellow 587 nm
OPA730BD 21.6 108 Blue 470 nm
OPA730GD 21.6 576 Green 530 nm
OPA730RD 15.0 312 Red 625 nm
OPA730WD 21.6 576 White 6500°K
Electrical / OpƟcal CharacterisƟcs: T
A
=25°C, I
F
=700mA
