TE
www.vishay.com
Vishay Sprague
Revision: 20-Jul-16
1
Document Number: 42042
For technical questions, contact: aluminumcaps4@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Aluminum Capacitors
Little-Lytic™ Electrolytics
FEATURES
• Proven dependable performance in the industrial
and electronic equipment with either transistor or
modified electron-tube circuits
• All terminal connections welded, eliminating
possibility of open or intermittent contacts occasionally
found in pressure joints of conventional capacitors
• Superior in size, performance characteristics, shelf life,
construction and reliability
• Metal-encased with clear plastic outer insulating sleeve
• Excellent circuit performance when used as coupling
capacitors
• Minimum drain and long battery life when used in battery
bypass applications
• Better performance under life test than most miniature
aluminum electrolytic capacitors
• Axial lead
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
CAPACITANCE VS. TEMPERATURE
DIMENSIONS AND AVAILABLE FORMS
QUICK REFERENCE DATA
DESCRIPTION VALUE
Operating temperature -40 °C to +105 °C
Tolerance on C
R
G = +75 %, -10 % and
F = +50 %, -10 %
Ripple current
10 mA to 600 mA max. at 120 Hz,
depending upon capacitance
and voltage.
Life validation test
2000 h at +85 °C
After test, capacitance value shall
not have changed by more than ± 20 %,
the equivalent series resistance in ohms
shall not have exceeded 150 % of initial
requirement and the leakage current
shall not have exceeded the
initial requirement.
DC leakage current
Maximum DC leakage current at +25 °C
for all capacitors is 15 μA, except units
in case code DD, which is 15.8 μA.
Shelf test
250 h at +85 °C,
with no voltage applied
The capacitance and equivalent series
resistance shall meet the initial
requirements and the DC leakage
current shall not exceed 300 % of the
initial requirement.
Available
800 µF - 3 V
300 µF - 16 V
200 µF - 25 V
100 µF - 50 V
25 µF - 100 V
- 40
Typical
- 20 0 + 20 + 40 + 60 + 80 + 100 + 120
0.9
1.0
1.1
1.2
Capacitance Ratio at 120 Hz
Temperature in °C
DIMENSIONS in millimeters
CASE CODE D L
BA 6.3 ± 0.7 13.0 ± 1.4
BB 6.3 ± 0.7 17.5 ± 1.7
CB 8.0 ± 0.6 17.5 ± 1.7
CC 8.0 ± 0.6 20.5 ± 1.8
DB 9.0 ± 0.7 17.5 ± 1.7
DC 9.0 ± 0.7 20.5 ± 1.8
DD 9.0 ± 0.7 24.0 ± 1.5
DF 9.0 ± 0.7 32.0 ± 1.5
DH 9.0 ± 0.7 38.0 ± 1.8
L
1.500
[38.10]
min.
D
0.032 [0.811] dia.
No. 20 AWG tinned copper leads
1.500
[38.10]
min.