© PHOENIX CONTACT - 09/2007
5559_en_05
AUTOMATIONWORX
IB IL 24 DO 16 ...
Data Sheet
Description
The terminal is designed for use within an Inline station. It is
used to output digital signals.
Features
Connections for 16 digital actuators
Connection of actuators in 2 and 3-wire technology
Nominal current per output: 0.5 A
Total current of the terminal: 8 A
Short-circuit and overload protected outputs
Diagnostic and status indicators
IB IL 24 DO 16, IB IL 24 DO 16-PAC and
IB IL 24 DO 16-PAC/SN:
Approved for the use in potentially explosive areas
(observe the notes on page 8)
Inline Terminal With 16 Digital Outputs
This data sheet is only valid in association with the IL SYS INST UM E user manual or the Inline system manual
for your bus system.
Please note that the numbering of the terminal points differs with regard to the different connector versions,
Figure 2 on page 7.
Make sure you always use the latest documentation.
It can be downloaded at www.download.phoenixcontact.com
.
A conversion table is available on the Internet at
www.download.phoenixcontact.com/general/7000_en_00.pdf.
This data sheet is valid for the products listed on the following page:
4x
1
2
3
4
D
DO
1
6
1
2
3
4
1
2
3
4
1
2
3
4
IB IL 24 DO 16 ...
5559_en_05 PHOENIX CONTACT 2
Ordering Data
Products
Documentation
Description Type Order No. Pcs./Pkt.
Inline terminal with 16 digital outputs;
complete with accessories (connector and labeling fields);
transmission speed of 500 kbps
IB IL 24 DO 16-PAC 2861292 1
Inline terminal with 16 digital outputs;
complete with accessories
(connector with individual numbering and labeling fields);
transmission speed of 500 kbps
IB IL 24 DO 16-PAC/SN 2862961 1
Inline terminal with 16 digital outputs; without accessories;
transmission speed of 500 kbps
IB IL 24 DO 16 2726272 1
Inline terminal with 16 digital outputs;
complete with accessories (connector and labeling fields);
transmission speed of 2 Mbps
IB IL 24 DO 16-2MBD-PAC 2862013 1
Inline terminal with 16 digital outputs;
complete with accessories
(connector with individual numbering and labeling fields);
transmission speed of 2 Mbps
IB IL 24 DO 16-2MBD-PAC/SN 2878324 1
Inline terminal with 16 digital outputs; without accessories;
transmission speed of 2 Mbps
IB IL 24 DO 16-2MBD 2855318 1
Four of the listed connectors or one connector set are needed for the complete fitting of the IB IL 24 DO 16 and IB IL 24 DO 16-2MBD
terminals.
Accessories
Description Type Order No. Pcs./Pkt.
Connector, without color print,
for digital 4-channel or 16-channel Inline terminals
IB IL SCN-12 2726340 10
Connector, with color print,
for digital 4-channel or 16-channel Inline terminals
IB IL SCN-12-OCP 2727624 10
Connector set with 48 spring-cage connections
(green, w/o color print)
IB IL DI/DO 16-PLSET 2860976 1
Connector set with 48 spring-cage connections
(green, with color print)
IB IL DO 16-PLSET/OCP 2860992 1
Description Type Order No. Pcs./Pkt.
"Automation Terminals of the Inline Product Range" user manual IL SYS INST UM E 2698737 1
"Configuring and Installing the INTERBUS Inline Product Range"
user manual
IB IL SYS PRO UM E 2743048 1
"INTERBUS Addressing" data sheet DB GB IBS SYS ADDRESS 9000990 1
"Inline Terminals for Use in Zone 2 Potentially Explosive Areas"
application note
AH EN IL EX ZONE 2 7217 1
"Addressing of 16-Channel Modules" application note AH IB IL 24 DI/DO 16 ADDRESS 9014124 1
IB IL 24 DO 16 ...
5559_en_05 PHOENIX CONTACT 3
Technical Data
General Data
Housing dimensions (width x height x depth) 48.8 mm x 120 mm x 71.5 mm
Weight 130 g (without connector), 152 g (with connector)
Operating mode Process data mode with 1 word
Connection method for actuators 2 and 3-wire technology
Ambient temperatures (operation) -25°C to +55°C
Ambient temperature (storage/transport) -25°C to +85°C
Permissible humidity (operation/storage/transport) 10% to 95% according to DIN EN 61131-2
Permissible air pressure (operation/storage/transport) 70 kPa to 106 kPa (up to 3000 m above sea level)
Degree of protection IP20 according to IEC 60529
Class of protection Class 3 according to EN 61131-2, IEC 61131-2
Connection data for Inline connector
Connection type Spring-cage terminals
Conductor cross-section 0.2 mm
2
to 1.5 mm
2
(solid or stranded), 24 - 16 AWG
Interface
Local bus Through data routing
Transmission Speed
IB IL 24 DO 16-PAC 500 kbps
IB IL 24 DO 16-PAC/SN 500 kbps
IB IL 24 DO 16 500 kbps
IB IL 24 DO 16-2MBD-PAC 2 Mbps
IB IL 24 DO 16-2MBD-PAC/SN 2 Mbps
IB IL 24 DO 16-2MBD 2 Mbps
Supply of the Module Electronics and I/O Through Bus Coupler/Power Terminal
Connection method Via potential routing
Power Consumption 500 kbps 2Mbps
Communications power 7.5 V DC 7.5 V DC
Current consumption at U
L
90 mA, maximum 105 mA, maximum
Power consumption at U
L
0.675 W, maximum 0.79 W, maximum
Segment supply voltage U
S
24 V DC (nominal value) 24 V DC (nominal value)
Nominal current consumption at U
S
8 A (16 x 0.5 A), maximum 8 A (16 x 0.5 A), maximum
Digital Outputs
Number 16
Nominal output voltage U
OUT
24 V DC
Differential voltage for I
nom
1 V
Nominal current I
nom
per channel 0.5 A
Tolerance of the nominal current +10%
Total current 8 A
Protection Short circuit; overload
Nominal load
Ohmic 48 Ω / 12 W
Lamp 12 W
Inductive 12 VA (1.2 H, 50 Ω)
Always 4 channels are thermally coupled, i.e., an error case in one channel can affect the other channels.

2861292

Mfr. #:
Manufacturer:
Phoenix Contact
Description:
I/O Modules IB IL 24 DO 16-PAC
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet