ATR0885-PFQW Datasheet ATR0885-PFQW | P4-P6

4923CS–DVD–02/08

ATR0885 [Preliminary]

Electrostatic sensitive device.

Observe precautions for handling.

3. Absolute Maximum Ratings

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating

only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this

specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

Parameters Pin Symbol Value Unit

Supply voltage V

VCCS

–0.5 to +6.0 V

Supply voltage output stages

(VCCA, VCCB, VCCC)

VCCH

–0.5 to +9.5 V

Input voltage V

PDIN

–0.5 to V

+0.5 V

Differential voltage 8, 9 V

diff_8,9

|0.5| V

Power dissipation P

max

0.7

(1)

to 1

(2)

Output voltage V

out

–0.5 to V

cch

–1 V

Junction temperature T

150 °C

Storage temperature T

stg

–65 to +125 °C

Notes: 1. R

thJA

≤ 115 K/W at T

amb

= 70°C

2. R

thJA

≤ 115 K/W at T

amb

= 25°C

4. Thermal Resistance

Parameters Symbol Value Unit

Junction ambient R

thJA

(1)

K/W

Note: 1. Measured with multi-layer test board (JDEC standard)

5. Recommended Operating Conditions

Parameters Symbol Value Unit

Supply voltage V

VCCS

4.5 to 5.5 V

High supply voltage (VCCA, VCCB, VCCC) V

VCCH

VCCS

to 9.0 V

Input current I

< 2 mA

Output voltage range V

PDOUT

0.8 to (V

VCCS

– 1.8) V

External resistor to GND to set oscillator frequency RF > 3 kΩ

External resistor to GND to set oscillator swing RS1, RS2, RS3 > 100 Ω

Operating temperature range T

amb

0 to +70 °C

Transimpedance resistor R

1 to 50 kΩ

Total capacitance at PDIN C

< 15 pF

Load resistance R

Load

> 5 kΩ

Load capacitance C

Load

< 30 pF

Reference voltage V

REF

1.6 to 3.0 V

4923CS–DVD–02/08

ATR0885 [Preliminary]

7. Package Information

8. Revision History

6. Ordering Information

Extended Type Number Package Remarks

ATR0885-PFQW Green QFN24 (4 mm × 4 mm) Taped and reeled

Package: QFN 24 - 4 x 4

Exposed pad 2.6 x 2.6

(acc. JEDEC OUTLINE No. MO - 220)

Dimensions in mm

specifications

according to DIN

technical drawings

0.9±0.1

0.05-0.05

0.5 nom.

712

2419

Not indicated tolerances ±0.05

Issue: 1; 03.06.05

Drawing-No.: 6.543-5101.02-4

2.6

2.5

Please note that the following page numbers referred to in this section refer to the specific revision

mentioned, not to this document.

Revision No. History

4923CC-DVD-02/08

• Put datasheet in a new template

• Pin Description table (page 3): Function of Pin 2 and 3 changed

4923CS–DVD–02/08

Headquarters International

Atmel Corporation

2325 Orchard Parkway

San Jose, CA 95131

USA

Tel: 1(408) 441-0311

Fax: 1(408) 487-2600

Atmel Asia

Room 1219

Chinachem Golden Plaza

77 Mody Road Tsimshatsui

East Kowloon

Hong Kong

Tel: (852) 2721-9778

Fax: (852) 2722-1369

Atmel Europe

Le Krebs

8, Rue Jean-Pierre Timbaud

BP 309

78054

Saint-Quentin-en-Yvelines Cedex

France

Tel: (33) 1-30-60-70-00

Fax: (33) 1-30-60-71-11

Atmel Japan

9F, Tonetsu Shinkawa Bldg.

1-24-8 Shinkawa

Chuo-ku, Tokyo 104-0033

Japan

Tel: (81) 3-3523-3551

Fax: (81) 3-3523-7581

Product Contact

Web Site

www.atmel.com

Technical Support

dvd_ldd@atmel.com

Sales Contact

www.atmel.com/contacts

Literature Requests

www.atmel.com/literature

Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any

intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDI-

TIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY

WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDEN-

TAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF

THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no

representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications

and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided

otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use

as components in applications intended to support or sustain life.

, logo and combinations thereof, and others are registered trademarks or trademarks of

Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.

P1-P3 P4-P6

ATR0885-PFQW

Mfr. #:

Buy ATR0885-PFQW

Manufacturer:

Microchip Technology / Atmel

Description:

Laser Drivers COM.DVD-3 Out Blue Laser f. Read Only

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

ATR0885-PFQW