PHE850EA4330MA02R17

RoHS
Compliant
pHE850
EMI suppressor, class Y2, metallized polypropylene
0.001 – 1.0 µF, 300 VAC, +110 °C
New, small dimensions including low profile capacitors
tYpiCaL appLiCations ConstRuCtion
tECHniCaL data
The capacitors are intended for use as
interference suppressors in Y2 (line-to-
earth) applications.
Winding of metallized polypropylene.
Encapsulated in self-extinguishing material
meeting the requirements of UL 94V-0.
EnViRonmEntaL tEst data
Endurance EN/IEC 60384-14:2005 1.7 x U
R
VAC 50 Hz, once every hour
increased to 1000 VAC for 0.1 s,
1000 h at upper rated temperature
Vibration IEC 60068-2-6, Test Fc 3 directions at 2 hour each, No visible damage, No open or short circuit
10 – 55 Hz at 0.75 mm or 98 m/s
2
Bump IEC 60068-2-29, Test Eb 1000 bumps at 390 m/s
2
No visible damage, No open or short circuit
Change of temperature IEC 60068–2–14 Upper and lower rated No visible damage
Test Na temperature 5 cycles
Active flammability EN/IEC 60384-14:2005
Passive flammability EN/IEC 60384-14:2005
Humidity IEC 60068-2-3, Test Ca +40°C and 90 – 95% R.H. 56 days
L
H
B
p
l
d
0.5
b
Rated voltage
Capacitance range µF
300 VAC, 50/60 Hz (ENEC,UL,cUL)
0.001–1.0
Temperature range °C –55/+110
Climatic category IEC 55/110/56/B
Capacitance tolerance ± 20% standard, other tolerances on request
Approvals ENEC, UL, cUL
Dissipation factor tanδ Maximum values at +23 °C
C 0.1 µF 0.1 µF < C 1 µF C > 1 µF
1 kHz 0.2% 0.15% 0.1%
10 kHz 0.3% 0.4% 0.8%
100 kHz 0.6%
Insulation resistance C 0.33 µF: 30 000 M
C > 0.33 µF: 10 000 s
Resonance frequency Tabulated self-resonance frequencies f
0
refer to 5 mm
lead lengths.
Test voltage between The 100% screening factory test is carried out at 5000
terminals
VDC and 2500 VAC. The voltage level is selected to meet
the requirements in applicable equipment standards. All
electrical characteristics are checked after the test.
In DC applications Recommended voltage: 1250 VDC
p d std l max l b
10.0 ± 0.4 0.6 17 30 ±0.4
15.0 ± 0.4 0.6/0.8* 17 30 ±0.4
22.5 ± 0.4 0.8 6 30 ±0.4
27.5 ± 0.4 0.8 6 30 ±0.4
37.5 ± 0.5 1.0 6 30 ±0.7
* Size 7.5 x 14.5 x 18.0 and bigger, d = 0.8
mm.
Tolerance in lead length
< 30 mm mm
30 mm mm
+0
–1
+5
–0
Not for use in series with the mains.
See www.kemet.com for more information.
PHE850
aRtiCLE taBLE
oRdERing inFoRmation
The article code for the standard part is given in the article table.
maRKing
RIFA
RIFA article code
Rated capacitance
Capacitance tolerance code
Rated voltage
Y2
Approval marks
IEC Climatic category
Passive flammability class
Manufacturing date code
appRoVaLs
Certification Body Specification
ENEC
UL
Capaci- Box Max dimensions Max
tance code in mm f
O
dU/dt Article code
µF B H L MHz V/µs
Capaci- Box Max dimensions Max
tance code in mm f
O
dU/dt Article code
µF B H L MHz V/µs
LEAD SPACING 10 MM
0.0010 A06 4.0 8.0 13.0 50 100 PHE850EA4100MA06R17
0.0012 A06 4.0 8.0 13.0 45 100 PHE850EA4120MA06R17
0.0015 A01 4.0 9.0 13.0 43 100 PHE850EA4150MA01R17
0.0018 A01 4.0 9.0 13.0 40 100 PHE850EA4180MA01R17
0.0022 A01 4.0 9.0 13.0 36 100 PHE850EA4220MA01R17
0.0027 A02 4.5 10.5 13.0 34 100 PHE850EA4270MA02R17
0.0033 A02 4.5 10.5 13.0 31 100 PHE850EA4330MA02R17
0.0039 A03 5.0 11.0 13.0 29 100 PHE850EA4390MA03R17
0.0047 A03 5.0 11.0 13.0 26 100 PHE850EA4470MA03R17
0.0056 A04 6.0 12.0 13.0 23 100 PHE850EA4560MA04R17
0.0068 A04 6.0 12.0 13.0 20 100 PHE850EA4680MA04R17
0.0068 A05 9.5 7.5 13.0 21 100 PHE850EP4680MA05R17
LEAD SPACING 15 MM
0.0068 B04 5.5 10.5 18.0 14 100 PHE850EB4680MB04R17
0.0082 B04 5.5 10.5 18.0 14 100 PHE850EB4820MB04R17
0.010 B04 5.5 10.5 18.0 13 100 PHE850EB5100MB04R17
0.012 B05 5.5 12.5 18.0 12 100 PHE850EB5120MB05R17
0.015 B15 6.0 12.0 18.0 11 100 PHE850EB5150MB15R17
0.018 B10 6.5 12.5 18.0 10 100 PHE850EB5180MB10R17
0.022 B06 7.5 14.5 18.0 9.5 100 PHE850EB5220MB06R17
0.027 B06 7.5 14.5 18.0 8.6 100 PHE850EB5270MB06R17
0.033 B12 8.0 15.0 18.0 7.8 100 PHE850EB5330MB12R17
0.039 B11 8.5 16.0 18.0 7.0 100 PHE850EB5390MB11R17
0.047 B14 9.5 17.5 18.0 6.3 100 PHE850EB5470MB14R17
0.047 B17 13.0 12.5 18.0 6.3 100 PHE850EH5470MB17R17
0.056 B16 11.0 19.0 18.0 5.5 100 PHE850EB5560MB16R17
0.068 B16 11.0 19.0 18.0 4.7 100 PHE850EB5680MB16R17
LEAD SPACING 22.5 MM
0.033 D13 6.5 14.5 26.0 5.7 100 PHE850ED5330MD13R06L2
0.039 D13 6.5 14.5 26.0 5.4 100 PHE850ED5390MD13R06L2
0.047 D13 6.5 14.5 26.0 5.0 100 PHE850ED5470MD13R06L2
0.056 D17 7.0 16.5 26.0 4.7 100 PHE850ED5560MD17R06L2
0.068 D17 7.0 16.5 26.0 4.3 100 PHE850ED5680MD17R06L2
0.082 D15 9.0 18.5 26.0 4.0 100 PHE850ED5820MD15R06L2
0.10 D18 10.5 19.0 26.0 3.6 100 PHE850ED6100MD18R06L2
0.12 D18 10.5 19.0 26.0 3.3 100 PHE850ED6120MD18R06L2
0.15 D16 11.0 21.5 26.0 2.8 100 PHE850ED6150MD16R06L2
0.18 D20 13.5 23.0 26.0 2.5 100 PHE850ED6180MD20R06L2
0.22 D20 13.5 23.0 26.0 2.3 100 PHE850ED6220MD20R06L2
LEAD SPACING 27.5 MM
0.15 F11 10.5 20.5 31.5 2.4 100 PHE850EF6150MF11R06L2
0.15 F17 21.0 12.5 31.5 2.4 100 PHE850ET6150MF17R06L2
0.18 F11 10.5 20.5 31.5 2.2 100 PHE850EF6180MF11R06L2
0.22 F12 11.5 22.5 31.5 2.1 100 PHE850EF6220MF12R06L2
0.27 F03 13.5 23.0 31.5 1.9 100 PHE850EF6270MF03R06L2
0.33 F13 14.5 24.5 31.5 1.7 100 PHE850EF6330MF13R06L2
0.39 F14 17.5 28.0 31.5 1.6 100 PHE850EF6390MF14R06L2
0.47 F14 17.5 28.0 31.5 1.4 100 PHE850EF6470MF14R06L2
0.47 F19 27.5 16.0 31.5 1.5 100 PHE850ET6470MF19R06L2
0.56 F16 21.0 30.0 31.5 1.3 100 PHE850EF6560MF16R06L2
0.68 F16 21.0 30.0 31.5 1.2 100 PHE850EZ6680MF16R06L2 *
LEAD SPACING 37.5 MM
0.33 R05 13.0 24.0 41.0 1.2 100 PHE850ER6330MR05R06L2
0.39 R05 13.0 24.0 41.0 1.1 100 PHE850ER6390MR05R06L2
0.47 R05 13.0 24.0 41.0 1.1 100 PHE850ER6470MR05R06L2
0.56 R04 15.0 26.0 41.0 1.0 100 PHE850ER6560MR04R06L2
0.68 R02 16.5 32.0 41.0 0.94 100 PHE850ER6680MR02R06L2
0.82 R02 16.5 32.0 41.0 0.88 100 PHE850ER6820MR02R06L2
1.0 R03 19.0 36.0 41.0 0.81 100 PHE850ER7100MR03R06L2
1.2 R06 21.0 38.0 41.0 0.74 100 PHE850ER7120MR06R06L2
1.5 R06 21.0 38.0 41.0 0.66 100 PHE850EW7150MR06R06L2 *
1.8 R08 28.0 43.0 41.0 0.58 100 PHE850ER7180MR08R06L2
2.2 R08 28.0 43.0 41.0 0.54 100 PHE850ER7220MR08R06L2
* Only ± 20% tolerance± 20% tolerance
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute
and we specifically disclaim any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
EN/IEC 60384-14:2013
UL 60384-14
CAN/CSA-E60384-14:09

PHE850EA4330MA02R17

Mfr. #:
Manufacturer:
KEMET Electronics
Description:
Safety Capacitors 300V 3300pF 20% LS=10mm
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union