2
Technical Data 10347
Effective May 2016
FPV1507
Dual conductor high current power inductor
www.eaton.com/elx
Product Specifications
Part Number
5
OCL
1
(nH) ±10%
I
rms
2
(A)
I
sat
3
(A)
DCR
4
(mΩ)
@ 20°C
Q minimum
reference only
FPV1507-500-R 500 20 40 1.15 ± 0.173 135
FPV1507-650-R 650 20 31 1.15 ± 0.173 135
1. Open Circuit Inductance (OCL) Test Parameters: 1.0 MHz, 0.1 Vrms, 0.0 Adc, +25 °C (Pins 1-3, short 2-4)
2. I
rms
: DC current for an approximate temperature rise of 40 °C without core loss. Derating is necessary for AC currents.
PCB layout, trace thickness and width, air-flow, and proximity of other heat generating components will affect the
temperature rise. It is recommended that the temperature of the part not exceed 125 °C under worst case operating
conditions verified in the end application.
3. I
sat
: Peak current for approximately 2% rolloff @ +25 °C
4. DCR measured from Pins (1-2) and (3-4)
5. Part Number Definition: FPV1507-xxx-R
FPV1507 = Product code and size
xxx= Inductance value in nH,
-R suffix = RoHS compliant
6. Q test parameters: 1 MHz, 0.1 V
rms
, +25 ºC, (Pins 1-3, short 2-4)
Note: Hipot: 200 Vdc minimum for 2 seconds, 0.1 mA pins (1-2) to (4-3)
Dimensions (mm)
DCR measured from point “A” to point “B”
Part marking: FPV1507-XXX (XXX= inductance value in nH), wwllyy=date code, R=revision level
Soldering surfaces to be coplanar within 0.1 millimeters
Pins 2 & 4 are connected through the PCB trace
Recommended Pad Layout Schematic
1.4
2.60
0.50
3.30
1
2
4
2
3
4
1
14.6
2.60
0.561.15
±0.1
10.1
±0.5
0.7
±0.2
2.3
±0.3
6.3
±0.30
8.3
±0.3
14.6
±0.5
4
1
3
2
Resist area
FPV1507-XXX
wwllyy R
