SRI512 commands SRI512
38/47 Doc ID 13263 Rev 5
Unique Identifier (UID)
Members of the SRI512 family are uniquely identified by a 64-bit Unique Identifier (UID).
This is used for addressing each SRI512 device uniquely after the anticollision loop. The
UID complies with ISO/IEC 15963 and ISO/IEC 7816-6. It is a read-only code, and
comprises (as summarized in Figure 49):
● an 8-bit prefix, with the most significant bits set to D0h
● an 8-bit IC manufacturer code (ISO/IEC 7816-6/AM1) set to 02h (for
STMicroelectronics)
● a 6-bit IC code set to 00 0110b = 6d for SRI512
● a 42-bit unique serial number
Figure 49. 64-bit unique identifier of the SRI512
Figure 50. Get_UID frame exchange between reader and SRI512
8.10 Power-on state
After power-on, the SRI512 is in the following state:
● It is in the low-power state.
● It is in Ready state.
● It shows highest impedance with respect to the reader antenna field.
● It will not respond to any command except Initiate().
AI12375
D0h Unique Serial Number02h
63 55 47
0
Most significant bits Least significant bits
41
6d
S
O
F
CRC
L
CRC
H
E
O
F
AI10950
Reader
SRI512
<-t
0
-> <-t
1
->
S
O
F
CRC
L
CRC
H
E
O
F
0Bh
UID
1
UID
2
UID
3
UID
4
UID
0
UID
5
UID
6
UID
7