General Purpose Relays
Industrial Relays
KBP Series Panel Relay
08-2011, Rev. 0811
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1
Potter & Brumfield
Coil Data (continued)
Coil versions, AC coil
Coil Rated Operate Coil Rated coil
code voltage voltage resistance power
VAC VAC Ω±15% VA
2 and 4 pole models
24 24 20.004 42 5.05
120 120 102 1030 5.3
240 240 204 4100 5.3
5 pole models
24 24 20.4 27 7.8
120 120 102 700 8.2
All figures are given for coil without preenergization, at ambient temperature +23°C
Insulation Data
Initial dielectric strength
between open contacts 500V
rms
between contact and coil 1000V
rms
between adjacent contacts 1000V
rms
Initial insulation resistance
between insulated elements 100MΩ
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature -45ºC to 85ºC
Category of environmental protection
IEC 61810 RTI - dust protected and
RT0 - open style
Terminal type 11- or 20-pin octal-style plug
Weight 306g
Packaging/unit tray/25 pcs., box/60pcs.
Accessories
For details see datasheet Sockets and Accessories, KBP Relays
Product Code Description
27E892 DIN 11 pin octal socket
27E123 Track mount 11 pin octal socket
27E928 17 and 20 pin octal socket
n
Dual coil latching relay accepts a momentary impulse to one coil to
latch and a second impulse to the other coil to release
n
Clear polycarbonate dust cover with 11- or 20-pin plug
n
11- or 20-pin octal-style plug connector
n
AC and DC coils
n
Two, four, and five pole Form C (CO) contact arrangements
Typical applications
Elevator controls
Approvals
UL E29244
Technical data of approved types on request
Contact Data 2 pole 4 pole 5 pole
Contact arrangement 2 form C (CO) 4 form C (CO) 5 form C (CO)
Rated voltage 120VAC
Rated current 10A
Contact material Ag, AgCdO
Min. recommended contact load
Ag contacts 100mA, 12VDC
AgCdO contacts 300mA, 12VDC
Initial contact resistance
Ag contacts 100mΩ
AgCdO contacts 200mΩ
Frequency of operation 360 ops./hour
Contact ratings
Type Load Cycles
UL 508
Ag 5A, 120VAC 50x10
3
AgCdO 10A, 120VAC 50x10
3
Mechanical endurance 500x10
3
ops.
Coil Data
Coil voltage range 12 to 220VDC
6 to 240VAC
Coil versions, DC coil
Coil Rated Operate Coil Rated coil
code voltage voltage resistance power
VDC VDC Ω±10% W
12 12 9 52 2.8
24 24 18 230 2.5
48 48 36 850 2.71
110 110 82.5 4560 2.65
– 220 165 Use 110VDC relay 2.42
with 5KΩ, 5W
resistor in series
All figures are given for coil without preenergization, at ambient temperature +23°C.
U
