DATA SHEET
© EnOcean | www.enocean.com Subject to modifications | November 2012
Power supply power generation by rocker operating
Electro-dynamic Power Generator
Antenna integrated PCB antenna
868.300 MHz (PTM 210 / PTM 215)
902.875 MHz (PTM 210U)
Channels 2 with 4 action states each (upper/lower pushbutton is pressed/released)
EnOcean Equipment Profile supported EEP F6-02-xx, F6-04-xx (PTM 210/215 normal mode)
rolling code with AES128 (PTM 215 secure mode)
Transmission range 300 m free field, typ. 30 m indoor
Energy bow travel/Operating force 1.8 mm / typ. 8 N (at room temperature)
Number of operations at 25°C typ. 100.000 actuations tested according to EN 60669 / VDE 0632
Module dimensions (inclusive rotation axis and energy bow) 40.0 x 40.0 x 11.2 mm
Operating temperature - 25 up to + 65 °C
Radio signals are event controlled (pushbutton is pressed / is released) with button code and unique
module identification (fix 32 bit ID).
Pushbutton Transmitter Module
PTM 210 / PTM 210U / PTM 215
The radio transmitter module from EnOcean
enables the implementation of wireless re-
mote controls without batteries. Power is
provided by a built-in electro-dynamic pow-
er generator.
Key applications are wall-mounted flat rocker
switches with 1 or 2 rockers (with medial posi-
tion), as well as handheld remote controls with
up to 4 single pushbuttons
Functional Principle
A common electro-dynamic energy transducer is
actuated by a bow, which can be pushed from
outside the module on the left or right by an ap-
propriate pushbutton or switch rocker. When the
energy bow is pushed down, electrical energy is
created and a RF telegram is transmitted includ-
ing a 32-bit module ID. Releasing the energy bow
generates different telegram data, so every PTM
telegram contains the information that the bow
was pressed or released. In addition, the radio
telegram transmits the operating status of 4 con-
tact nipples when activating the bow. This ena-
bles the identification of up to 2 appropriate
switch rockers or up to 4 single pushbuttons.
„Long“ or „Short“ pushbutton operation (the time
between pushing and releasing the push button)
can be easily detected by the receiver. By doing
that, applications such as dimming control or
jalousie control including slat action are simple to
implement.
PTM 215 contains additional encryption mode.
Telegrams are encrypted via a combination of
rolling code and AES128 algorithm.
PTM 210
PTM 210U
S3001-A210 (868 MHz)
S3051-A210 (902 MHz)
