For further information contact your local STMicroelectronics sales
office
868 MHz RF USB dongle based on the SPIRIT1 SPSGRF-868
module
Features
RF SPIRIT1 USB dongle based on
SPSGRF-868 for 868 MHz
SPSGRF-868 module is based on:
868 MHz ETSI certified module based
on low-power, low-rate sub-1GHz
SPIRIT1 transceiver.
Integrated Balun (BALF-SPI-01D3)
Chip antenna
On board STM23L low power 32-bit ARM®
Cortex-M3™ microcontroller
Modulation schemes: 2-FSK, GFSK, MSK,
GMSK, OOK and ASK
Air data rate: from 1 to 500 kbps
Full compliant in terms of firmware and GUI
with the SPIRIT1 development kits
Debug connector
USB interface
RoHS compliant
Description
The STEVAL-IDS001V4M evaluation board is for
the SPSGRF-868 ETSI certified module based
on the low-power, low-rate, sub-1GHz SPIRIT1
transceiver. The SPSGRF-868 module integrates
the Balun (BALF-SPI-01D3) and a chip antenna,
and operates in the 868 MHz ISM band. The
board is equipped with an STM32L low power
microcontroller to control the SPIRIT1 and it also
features a USB connector for PC GUI interaction
and firmware updates, like the one available for
SPIRIT1 evaluation kit. An SWD connector allows
the development of specific firmware on the
microcontroller.