Evaluates: MAX9392/MAX9393
Evaluating the MAX9393
The MAX9392 EV kit can be used to evaluate the
MAX9393 by replacing U1 with the MAX9393. Install a
shunt across jumper JU1, a resistor at R1, and a poten-
tiometer at R2, in addition to applying the desired termi-
nation voltage at the VTERM_IN PCB pad to evaluate
the MAX9393. Resistor R1 and potentiometer R2 are
used to provide current sinking capability to the EV kit
circuit when evaluating LVPECL, CML, and other VCC
referenced differential input signals. PCB pad
VERTM_OUT can also be used to set the LVDS output
termination voltages. See Table 4 for proper configura-
tion of jumper JU1 when evaluating the MAX9393.
MAX9392 Evaluation Kit
4 _______________________________________________________________________________________
Table 4. Jumper JU1 Configuration
