KYOCERA CORPORATION
EQM08-4KC-F5AS103-00
9-2-4. Reel label
A reel label shall be contained as below: (Based on EIAJ C-3 format)
A) Customer P/N
B) Lot No.
C) Quantity
D) Shipping date
E) Vender Name
9-2-5. Exterior Package label
Shock sensor shall be packed properly to avoid defect in transportation and the marking of exterior
package shall be contained as below:
A) Name of Customer
B) P/O No.
C) Customer P/N
D) Lot No.
E) Quantity
F) Shipping Date
10. The agreement of this specifications
Should any part of the content of this specification become questionable, it shall be settled by
mutual deliberations.
11. Caution for handling
A) Shock and or vibration to piece parts shall not be exceed the defined specification.
B) This parts cannot washing and cleaning after soldering process.
C) Maximum temperature is 280 degree.
D) Notes in soldering
Solder iron temp: 350±10 degrees C
Heat time:Max 3 seconds (Accumulated time)
- Please take care of solder iron not to attach products directly.
-
Please use new product attached no solder when you rework.
12.RoHS Compliant
A) Sensor Case: Epoxy resin
B) Terminal: Ag paste (thickness 30 um)
Plating: Ni(2um), Sn(5 um)
C) Elememt: Piezo Ceramic, contains lead-oxide, however, piezo-electronic devices
are exempted from RoHS compliant requirement of article 4(1).
(Refer to Annex, Section 7)
All materials meet to RoHS Compliant.
(5/6 )
Preliminary
