OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HDSP-701A

P1-P3P4-P6
4
Optical/Electrical Characteristics at T
A
= 25°C
High Eciency Red Devices HDSP-701E/711E/703E/713E
Parameter Symbol Min. Typ. Max. Units Test Conditions
Luminous Intensity/Dot
(Digit Average)
[1]
I
V
1.289 2.500 mcd I
F
= 50 mA,
20% Duty Factor
Peak Wavelength l
PEAK
632 nm I
F
= 20 mA
Dominant Wavelength
[2]
ld 622 nm I
F
= 20 mA
Forward Voltage V
F
3.40 V I
F
= 50 mA
2.05 2.50 I
F
= 20 mA
1.60 I
F
= 5 mA
Reverse Voltage
[3]
V
R
5 V I
R
= 100 µA
Luminous Intensity
Matching Ratio
I
V-M
2:1 I
F
= 50 mA
20% Duty Factor
Green Devices HDSP-701G/711G/703G/713G
Parameter Symbol Min. Typ. Max. Units Test Conditions
Luminous Intensity/Dot
(Digit Average)
[1]
I
V
0.96 2.50 mcd I
F
= 50 mA,
20% Duty Factor
Peak Wavelength l
PEAK
568 nm I
F
= 20 mA
Dominant Wavelength
[2]
ld 573 nm I
F
= 20 mA
Forward Voltage V
F
3.40 V I
F
= 50 mA
1.80 2.25 2.60 I
F
= 20 mA
1.60 I
F
= 5 mA
Reverse Voltage
[3]
V
R
5 V I
R
= 100 µA
Luminous Intensity
Matching Ratio
I
V-M
2:1 I
F
= 50 mA
20% Duty Factor
AlGaAs Devices HDSP-701A/711A/703A/713A
Parameter Symbol Min. Typ. Max. Units Test Conditions
Luminous Intensity/Dot
(Digit Average)
[1]
I
V
1.55 2.10 mcd I
F
= 10 mA,
20% Duty Factor
Peak Wavelength l
PEAK
660 nm I
F
= 20 mA
Dominant Wavelength
[2]
ld 643 nm I
F
= 20 mA
Forward Voltage V
F
1.8 2.0 V I
F
= 20 mA
2.0 I
F
= 10 mA
1.5 I
F
= 5 mA
Reverse Voltage
[3]
V
R
5 V I
R
= 100 µA
Luminous Intensity
Matching Ratio
I
V-M
1.5:1 I
F
= 10 mA
20% Duty Factor
Notes:
1. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
2. The dominant wavelength, ld, is derived from the CIE chromaticity diagram and represents the single wavelength which denes the
color of the device.
3. Indicates production nal test condition only. Long term reverse biasing is not recommended.
5
I
DC
– MAXIMUM DC CURRENT PER SEGMENT – mA
0
0
T
A
– AMBIENT TEMPERATURE – C
20 80 100
35
15
6040
GREEN, HER
5
10
20
25
30
AlGaAs
I
F
– FORWARD CURRENT PER SEGMENT – mA
1
0
V
F
– FORWARD VOLTAGE – V
90
70
60
30
10
3 5
80
50
20
2 4
40
HER
GREEN
AlGaAs
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
0
0
I
F
– DC FORWARD CURRENT – mA
4.0
3.0
2.5
1.5
0.5
20 40
3.5
2.0
1.0
10 30
GREEN, HER
5 15 25 35
AlGaAs
ηV – RELATIVE EFFICIENCY
(NORMALIZED TO/AT 10 mA PER SEGMENT)
0
0.8
I
PEAK
– PEAK FORWARD CURRENT
PER SEGMENT – mA
90
20 70 80 100
1.4
1.3
1.2
1.1
1.0
0.9
6050403010
RED
GREEN
AlGaAs
Figure 1. Maximum Allowable Average Current
Per Dot vs. Ambient Temperature.
Figure 2. Forward Current vs. Forward Voltage.
Figure 3. Relative Luminous Intensity vs.
DC Forward Current.
Figure 4. Relative Eciency (Luminous Intensity
Per Unit Current Per Dot) vs. Peak Current Per Dot.
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2015 Avago Technologies. All rights reserved. Obsoletes 5988-8400EN
AV02-0450EN - October 5, 2015
Color Bin Limits (Dominant Wavelength)
Color Bin
Dominant Wavelength (nm)
Min. Max.
Green 2 573.6 576.5
3 570.6 573.5
4 567.6 570.5
5 564.5 567.5
Note:
All categories are established for classication of products. Products
may not be available in all categories. Please contact your local Avago
representatives for further clarication/information.
Contrast Enhancement
For information on contrast enhancement, please see
Application Note 1015.
Soldering/Cleaning
Cleaning agents from the ketone family (acetone,
methyl ethyl ketone, etc.) and from the chlorinated
hydrocarbon family (methylene chloride, trichloro-eth-
ylene, carbon tetrachloride, etc.) are not recommended
for cleaning LED parts. All of these various solvents
attack or dissolve the encapsulating epoxies used
to form the package of plastic LED parts.
For information on soldering LEDs, please refer to Appli-
cation Note 1027.
Device Reliability
For reliability information, please see the reliability
datasheet
17.3 mm General Purpose
5 x 7 Dot Matrix Alphanumeric Displays.
Intensity Bin Limits
[1]
(mcd at 50 mA, 20% Duty Factor)
High Eciency Red
Bin name Min.
[2]
Max.
[2]
E 1.289 1.934
F 1.934 2.900
G 2.900 4.350
H 4.350 6.525
Green
Bin name Min.
[2]
Max.
[2]
H 0.96 1.44
I 1.44 2.15
J 2.15 3.23
K 3.23 4.85
L 4.85 7.28
Notes:
1. Bin categories are established for classication of products.
Products may not be available in all bin categories.
2. Tolerance for each intensity bin limit is ±10%.
Intensity Bin Limits
[1]
(mcd at 10 mA, 20% Duty Factor)
AlGaAs
Bin name Min.
[2]
Max.
[2]
I 1.55 2.33
J 2.33 3.49
Notes:
1. Bin categories are established for classication of products.
Products may not be available in all bin categories.
2. Tolerance for each intensity bin limit is ±10%.
P1-P3P4-P6

HDSP-701A

Mfr. #:
Buy HDSP-701A
Manufacturer:
Broadcom / Avago
Description:
LED Displays & Accessories Red 643nm 0.68in 5x7 Dot Matrix
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet