APEM www.apem.com
Note: The company reserves the right to change specifications without notice.
CJ series
Ergonomic multifunction joysticks
Distinctive features and specifications
Hall effect sensors
Ergonomic and versatile design
1 and 2 axis configurations
Redundant outputs available
Available with CAN bus and USB outputs
Industry common mounting cutout
and hole pattern
MECHANICAL (FOR X AND Y AXIS)
• Break Out Force: 5.6N (1.26lbf)
• Operating Force: 7.6N (1.70lbf)
• Maximum Applied Force: 649.4N (146lbf)
• Mechanical Angle of Movement: 40º (±20º)
• Expected Life: 10 million cycles
• Material: Glass reinforced nylon
• Lever Action (Centering): Spring centering
ENVIRONMENTAL
• Operating Temperature: -40ºC to 85ºC (-40ºF to 185ºF)
• Storage Temperature: -40ºC to 85ºC (-40ºF to 185ºF)
• EMC Immunity Level (V/M): IEC 61000-4-3:2006
• EMC Emissions Level: IEC 61000-4-8:2009
• ESD: IEC 61000-4-2:2008
• Supply Voltage Range: 5.00V±0.01V
• Ratiometric output voltage: See options
• Reverse Polarity Max: -10V
• Transient Overvoltage Max: 16V
• Output Impedance: 2Ω
• Return to Center Voltage Tolerance: ±200mV initial
• Supply Current: 13mA per sensor
STANDARD PUSHBUTTON SWITCH
CHARACTERISTICS/RATINGS
• Max Current / Voltage Rating with Resistive Load:
400mA 32VAC - 100mA 50VDC - 125mA 125VAC
• Low Level: 10mA @ 30mV
(depending on the chosen switch)
• Electrical Life: 1 million cycles 5A @ 28 VDC
resistive snap-action (depending on the chosen switch)
• Mechanical Life: 1 million cycles
• Environmental Seal: IP67
• Action: Momentary, pushbutton
• Operating Force: 7N±3N (1.57lbf±0.67lbf)
• Total Travel: 1.9mm (0.07in)±0.3mm (0.01in)
CAN OUTPUT VERSION
• Supply Voltage Range (VDC): 6V to 35V
• CAN Versions: CAN bus J1939, CANopen
NOTES:
– All values are nominal.
– Exact specifications may be subject to configuration.
– Contact Technical Support for the performance of your
specific configuration.
ELECTRICAL SENSOR