NCP630
http://onsemi.com
2
MAXIMUM RATINGS
Rating Symbol Value Unit
Input Voltage (Note 1) V
in
12 V
Shutdown Voltage Shutdown −0.3 to V
in
+ 0.3 V
Output Voltage V
out
−0.3 to V
in
+ 0.3 V
Output Short Circuit Duration (Note 2) − Infinite −
Power Dissipation and Thermal Characteristics
Case 936F (D
2
PAK)
Power Dissipation (Note 2)
Thermal Resistance, Junction−to−Ambient
Thermal Resistance, Junction−to−Case
P
D
R
qJA
R
qJC
Internally Limited
45
5.0
W
°C/W
°C/W
Operating Junction Temperature Range T
J
−40 to 125 °C
Storage Temperature Range T
stg
−55 to 150 °C
Lead Soldering Temperature @ 260°C T
solder
10 sec
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,
damage may occur and reliability may be affected.
1. This device series contains ESD protection and exceeds the following tests:
Human Body Model JESD 22−A114−B
Machine Model JESD 22−A115−A
2. The maximum package power dissipation is:
P
D
+
T
J(max)
* T
A
R
qJA
PIN FUNCTION DESCRIPTION
Pin No. NCP630A NCP630G Description
1 Shutdown Shutdown This input is used to place the NCP630 into shutdown mode. The NCP630
is active when a voltage greater than 2.0 V is applied. The NCP630 will be
placed into a shutdown mode when a voltage less than 0.8 V is applied. If
left unused then connect the pin high.
2 V
in
V
in
Positive power supply input voltage
3, Tab Ground Ground Power supply ground
4 V
out
V
out
Regulated output voltage
5 Adj − This pin is to be Connected to the R
sense
resistors on the output. It main-
tains 1.216 V between itself and ground. Refer to Figure 1 for equation.
5 − Sense This pin is to be connected near the load for better regulation.