TSH282
Sensitivity Unipolar Hall Effect Switch
1/8
Version: B13
Description
TSH282 is an unipolar Hall effect sensor IC. It incorporates advanced chopper stabilization technology to provide
accurate and stable magnetic switch points. The design, specifications and performance have been optimized for
applications of solid state switches. The output transistor will be switched on (B
OP
) in the presence of a sufficiently
strong South pole magnetic field facing the marked side of the package. Similarly, the output will be switched off
(B
RP
) in the presence of a weaker South field and remain off with “0” field.
Features
● CMOS Hall IC Technology
● Solid-State Reliability
● Chopper stabilized amplifier stage
● Unipolar, output switches with absolute value of
South pole from magnet
● Operation down to 3.0V
● High Sensitivity for direct reed switch replacement
applications
Ordering Information
Part No. Package Packing
TSH282CT B0G TO-92S 1Kpcs / Bulk Bag
TSH282CX RFG SOT-23 3Kpcs / 7” Reel
Note: “G” denote for Halogen Free Product
Application
● Solid state switch
● Limit switch, Current limit
● Interrupter
● Current sensing
● Magnet proximity sensor for reed switch
replacement
Absolute Maximum Rating
(Ta = 25
o
C unless otherwise noted)
Limit Value
Supply voltage V
27
V
Output Voltage V
27
V
Reverse voltage V
-0.3
V
Magnetic flux density
Unlimited
Gauss
Output current I
50
mA
Operating Temperature Range
T
OPR
-40 to +85
o
C
Storage temperature range T
-55 to +150
C
Maximum Junction Temp T
150
C
Thermal Resistance - Junction to Ambient
TO-92S
θ
JA
206
o
C/W
SOT-23
543
Thermal Resistance - Junction to Case
TO-92S
θ
JC
148
o
C/W
SOT-23
410
Package Power Dissipation
TO-92S
P
D
606
mW
SOT-23
230
Note: Exceeding the absolute maximum ratings may cause permanent damage. Exposure to absolute maximum-
rated conditions for extended periods may affect device reliability.
1. V
CC
2. GND
3. Output
1. V
CC
2. Output
3. GND