Part Number: XSFBB983W
SUPER FLUX LED LAMP
Oct 10,2016 XDSB5191 V5-Z Layout: Maggie L.
P. 1/3
Features
● High current operation for greater luminous output
● Low power consumption and thermal resistance
● Can be used with automatic insertion equipment
● RoHS Compliant
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Benefits:
●Rugged design allows for easy maintenance
●Robust package for optimum reliability
Typical Applications:
●Automotive side markers
●Gaming and entertainment lighting
●Signs and road hazard indicators
Package Schematics
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
Absolute Maximum Ratings
(T
A
=25°C)
Blue
(InGaN)
Unit
Reverse Voltage V
R
5 V
DC Forward Current I
F
30 mA
Power Dissipation P
D
135 mW
Operating Temperature T
A
-40 ~ +85
°C
Storage Temperature Tstg -55 ~ +85
Lead Solder Temperature
[1.5mm Below Seating Plane.][1]
260°C For 5 Seconds
Electrostatic Discharge Threshold
(HBM)
250 V
Blue
(InGaN)
Unit
Forward Voltage (Typ.) (I
F
=30mA) V
F
3.5 V
Forward Voltage (Max.) (I
F
=30mA) V
F
4.5 V
Reverse Current (Max.) (V
R
=5V) I
R
50 uA
Wavelength of Peak Emission
CIE127-2007*(Typ.)
(I
F
=30mA)
λP 465* nm
Wavelength of Dominant Emission
CIE127-2007*(Typ.)
(I
F
=30mA)
λD 470* nm
Spectral Line Full Width At Half
Maximum (Typ.) (I
F
=30mA)
△λ 22 nm
Capacitance (Typ.) (V
F
=0V, f=1MHz) C 100 pF
Thermal Resistance (Typ.) Rθj-pin 180 °C/W
Operating Characteristics
(T
A
=25°C)
Part
Number
Emitting
Color
Emitting
Material
Lens-color
Luminous Intensity
CIE127-2007*
(I
F
=30mA) cd
Luminous Flux
CIE127-2007*
(I
F
=30mA) lm
Viewing
Angle
2θ 1/2
min. typ. typ.
XSFBB983W Blue InGaN Water Clear 0.9* 1.195* 1.3* 40°
1.Luminous intensity is measured with an integrating sphere after the device has stabilized.
2.θ 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
3.LEDs are binned according to their Luminous intensity.
* Luminous intensity / luminous flux value and wavelength are in accordance with CIE127-2007 standards.
Wavelength
CIE127-2007*
λP nm
465*
1.No Reflow soldering .
2.A Relative Humidity between 40% and 60% is recommended in
ESD-protected work areas to reduce static build up during assembly
process (Reference JEDEC/JESD625-A and JEDEC/J-STD-033)
