https://www.phoenixcontact.com/us/products/1430608
08/25/2014Page2/4
Sensor/Actuator cable-SAC-12P-MR/10,0-PUR SCO-1430608
Technical data
General
Rated voltage 30 V
Number of positions 12
Contact resistance ≤ 5 mΩ
Insulation resistance ≥ 100 MΩ
Coding A - standard
Standards/regulations M12 connector IEC 61076-2-101
Status display No
Protective circuit/component Unwired
Surge voltage category II
Pollution degree 3
Torque 0.4 Nm (M12 connector)
Material
Inflammability class according to UL 94 V0
Contact material CuZn
Contact surface material Ni/Au
Contact carrier material PA 66
Material of grip body TPU, hardly inflammable, self-extinguishing
Material, knurls Zinc die-cast, nickel-plated
Cable
Conductor cross section 12x 0.14 mm² (signal line)
AWG signal line 26
Conductor structure signal line 18x 0.10 mm
Core diameter including insulation 1 mm ±0.05 mm (signal line)
Wire colors
White, brown, green, yellow, gray, pink, blue, red, black, violet, gray/pink,
red/blue
Overall twist 12 wires twisted in layers
External sheath, color Black RAL 9005
External cable diameter D 7.2 mm
Number of bending cycles 4000000
Bending radius 54 mm
Traversing path 10 m
Traversing rate 3 m/s
Acceleration 10 m/s²
Outer sheath, material PUR
Material conductor insulation PP
Conductor material Tin-plated Cu litz wires
Conductor resistance 142 Ω/km