WH1P030WA1-E6000

DATASHEET

278-25-336 REVISION B 03/13/15 1 ©2015 Integrated Device Technology, Inc.

Resistance Weld SMD Crystal 278-25-336

For use with IDT’s VCXO-based Synchronization PLLs

Specifications

Note: Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, etc. may vary.

Temperature Range

Operating (T

OPR) -40°C ~ +85°C

O) 4.0 pF

Pullability (C0 / C1) 270

Load Capacitance (CL)10 pF

DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in

this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined

in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether

express or implied, including, but not limited to, the suitability of IDT’s products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This

document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any third parties.

IDT’s products are not intended for use in applications involving extreme environmental conditions or in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably

names, logos and designs, are the property of IDT or their respective third party owners.