DO NOT
SCALE FROM
THIS PRINT
.300 7.62
REF
.320 8.13
REF
.100 2.54
((No OF POS -1)
x .100[2.54])
.008[.20]
.120
REF
3.05
2
MAX SWAY
(EITHER DIRECTION)
"A"
"A"
T-1S64-07-XXX
IPL1-XX-D-P
C
C
C
FIG 1
IPL1-106-01-XXX-D-P SHOWN
(SEE NOTE 11)
.100
REF
2.54
.040
REF
1.02
(No OF POS x .100[2.54])
+ .060[1.52] REF
.250 6.35
REF
.100
REF
2.54
(No OF POS -1)
x .100[2.54] REF
.080
REF
2.03
02
01
C
L
07
C
L
IPL1-1XX-XX-XXX-D-XX-X-XX
PLATING SPECIFICATION
LEAD STYLE
-01: THROUGH HOLE
(USE T-1S64-XX-XX)
-02: SURFACE MOUNT
(SEE FIG 2, SHT 2)
(USE T-1S64-XX-XX)
OPTION
-RA: RIGHT ANGLE (SEE FIG 3, SHT 2)
(AVAILABLE WITH -01 LEAD STYLE ONLY)
-P: POLARIZATION (SEE FIG 1)
(USE IPL1-XX-D-P)
(NOT AVAILABLE W/ -K OR -G, OPTIONS)
-K: KEYED POLARIZATION
(USE IPL1-XX-D-K)
(SEE FIG 5, SHEET 3)
(NOT AVAILABLE W/ -P OR -G, OPTIONS)
-G: GUIDE POSTS (SEE FIG 6 & 7, SHEET 3)
(USE IPL1-XX-D-GP)
(NOT AVAILABLE W/-P, -K OPTIONS)
(LEAVE BLANK FOR NO POLARIZATION
(SEE FIG 4, SHEET 3), SAMTEC WILL ONLY SUPPORT
EXISTING BUSINESS AS OF REV U)
OPTION
-02 THRU -25
(PER ROW)
No OF POSITIONS
PACKAGING OPTION
-TR: TAPE & REEL
(AVAILABLE WITH -02 LEAD STYLE ONLY)
(MUST USE K-DOT-.256-.375-.005)
(SEE FIG 8, SHT 3)
ROW SPECIFICATION
-D: DOUBLE (USE IPL1-XX-D)
.025
SQ REF
0.64
.215 5.46
REF
SEE NOTE 9
.100 2.54
2
MAX SWAY
(EITHER DIRECTION)
SECTION "A"-"A"
C
C
SEE NOTE 5
C
C
-F: FLASH SELECTIVE (USE T-1S64-XX-F)
-L: LIGHT SELECTIVE (USE T-1S64-XX-L)
-S: SELECTIVE (USE T-1S64-XX-S)
-H: HEAVY GOLD (T-1S64-XX-H)
-FM: FLASH SELECTIVE/MATTE TIN TAILS
(USE T-1S64-XX-F)
-LM: LIGHT SELECTIVE/MATTE TIN TAILS
(USE T-1S64-XX-L)
-SM: SELECTIVE/MATTE TIN TAILS
(USE T-1S64-XX-S)
-STL: SELECTIVE/ TIN/LEAD TAILS
(USE T-1S64-XX-STL)
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01[.3]
2
.XXX:
.005[.13]
.XXXX:
.0020[.051]
MATERIAL:
.100[2.54] DOUBLE ROW TERMINAL ASSEMBLY
BY:
IPL1-1XX-XX-XXX-D-XX-X-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
KEVIN B
03/11/02
3
1
SHEET SCALE: 3:1
INSULATOR: LCP UL94-V0, COLOR: BLACK
-K INSULATOR: LCP UL94-V0, COLOR: NATURAL
TERMINAL: PHOS BRONZE
C:\EnterpriseVault\DWG\MISC\MKTG\IPL1-1XX-XX-XXX-D-XX-X-XX-MKT.slddrw
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. NOTE DELETED.
3. MINIMUM TERMINAL RETENTION: 1 LB.
4. PARTS TO BE MOLDED TO POSITION.
5. POST MUST BE WITHIN .005[.13] OF EACH OTHER.
6. ALL PIN TO PIN DIMENSIONS TO BE MEASURED
FROM TIP TO TIP.
7. NOTE DELETED.
8. DIMENSION TO BE MEASURED AT BEND.
9. TIP TO BE FLUSH TO .015 BELOW TOP OF SHROUD.
10. BOTH ROWS TO BE SYMMETRIC WITHIN .010[0.25].
11.THIS NUMBER REPRESENTS THE NUMBER OF POSITIONS
PER ROW ONLY AND IS NOT INTENDED TO BE USED IN
POSITION NUMBERING.
12. 1 OR 2 GATE PADS TO BE PRESENT AT VENDOR DISCRETION.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION AH
