THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
*
*
DO NOT
SCALE FROM
THIS PRINT
-02 THRU -50
(PER ROW)
-01: .120 [3.05]
-02: .075 [1.91]
-04: .150 [3.81]
OPTIONS
-DH: DOUBLE HORIZONTAL
PLATING SPECIFICATION
FTSH-1XX-XX-XXX-DH-XX
TAIL OPTION
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-H: 30µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-LTL: 10µ" SELECTIVE GOLD IN CONTACT AREA,
TIN/LEAD (90/10+/-5%) TAIL
-G: 10µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
No OF POSITIONS
LEAD STYLE
-TR: TAPE AND REEL
-A: ALIGNMENT PIN
(SEE FIG 2, SHEET 2 & FIG 3, SHEET 3)
(MOLDED TO POSITION
OR STAKED)
(SAMTEC DISCRETION WHICH
-A PIN IS USED)
(STAKED 6 POSITION MIN. SEE FIG 3,
SHEET 3, USE FTSH-50-DH)
(MOLDED 5 POSITION MIN. SEE FIG 2,
SHEET 2, USE FTSH-50-DH-AXX)
-C: POLYIMIDE FILM
(USE K-DOT-.197-.344-.005)
(SEE FIG 4, SHEET 3)
(No OF POS x .0500[1.270] - .0500[1.270])
(No OF POS x .0500[1.270])
.0500 1.270
.135 3.43
REF
01 03
04
+.005[0.13]
-.010[0.25]
02
FTSH-50-DH
SEE NOTE 4
'B'
.000±.002 0.00±0.05
(SEE NOTE 6)
DETAIL 'B'
SCALE 20 : 1
C
.016 0.41
SQ REF (TYP)
2
MAX SWAY
(EITHER DIRECTION)
FIG 1
FTSH-1XX-XX-XXX-DH SHOWN
.032 0.82
"A"
.099 2.51
REF
.21 5.3
.070 1.78
REF
(CONTACT AREA)
2
MAX SWAY
(EITHER DIRECTION)
CRITICAL AREA
(SEE NOTE 4)
C
C
T-1S15-17-XXX
SEE NOTE 3
.006[0.15]
C
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
.050 x .050 C.L. DOUBLE HORIZONTAL TERMINAL STRIP
BY:
FTSH-1XX-XX-XXX-DH-XX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
BRATCHER
01/04/1995
3
1
SHEET SCALE: 4:1
INSULATOR:
LCP, UL 94-V0 COLOR: BLACK
TERMINAL:
PHOSPHOR BRONZE, ALLOY No. 510, GRADE A, FED. SPEC.
QQ-B-750, SPRING TEMPER
F:\DWG\MISC\MKTG\FTSH-1XX-XX-XXX-DH-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
PATENT NUMBERS
5713755 / 5961339
NOTES:
1. REPRESENTS A CRITICAL DIMENSION
2. MINIMUM PUSH OUT FORCE: .5 LB.
3. MAXIMUM BURR ALLOWED: .002[.05].
4. MAXIMUM CUT FLASH ALLOWED IN NON- CRITICAL AREA: .010[.25],
NO CUT FLASH ALLOWED IN CRITICAL AREAS AS SHOWN.
5. MAXIMUM HEIGHT VARIATION .005[.13] BETWEEN ROWS.
6. APPLIES TO FIRST AND LAST PIN OF EACH ROW.
REVISION BQ
