USER INTERFACE, ALERTS & CONTROLS
Front Panel LEDs Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.
Switches 3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant
on/off control of the inverter system when used in conjunction with optional <a class="productLink"
href="//www.tripplite.com/Remote-Control-Module-Tripp-Lite-PowerVerter-Inverters-Inverter-
Chargers~APSRM4">APSRM4</a> accessory when used in inverter mode. In AC uninterruptible power
mode, "auto/remote" setting enables automatic transfer from line power to battery power - to maintain continuous AC
power to connected loads.
SURGE / NOISE SUPPRESSION
AC Suppression Joule Rating 600
PHYSICAL
Shipping Dimensions (hwd / in.) 12.80 x 14.40 x 21.10
Shipping Dimensions (hwd / cm) 32.51 x 36.58 x 53.59
Shipping Weight (lbs.) 43.00
Shipping Weight (kg) 19.50
Unit Dimensions (hwd / in.) 7.25 x 8.5 x 16.25
Unit Dimensions (hwd / cm) 18.42 x 21.59 x 41.28
Unit Weight (lbs.) 40
Unit Weight (kg) 18.14
Cooling Method Multi-speed fan
Material of Construction Polycarbonate
Form Factors Supported Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional
mounting information)
ENVIRONMENTAL
Relative Humidity 0-95% non-condensing
LINE / BATTERY TRANSFER
Transfer Time (Line Power to
Battery Mode)
16.6 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer time
compatibility of loads for UPS applications)
Low Voltage Transfer to Battery
Power
In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 75V (user adjustable to 85, 95,
105V - see manual)
High Voltage Transfer to Battery
Power
In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 135V (user adjustable to
145 - see manual)
SPECIAL FEATURES
Load Sensing Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off
and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of
any level, up to 150 watts.
WARRANTY
4 / 5
