OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

SA5232D/01,112

P1-P3P4-P6P7-P9P10-P10


NE/SA/AU5232
Matched dual high-performance
low-voltage operational amplifier
Product data 2002 May 21
INTEGRATED CIRCUITS
Philips Semiconductors Product data
NE/SA/AU5232
Matched dual high-performance
low-voltage operational amplifier
2
2002 May 21 853–2347 28261
DESCRIPTION
The NE/SA/AU5232 is a matched, low voltage, high performance
dual operational amplifier. Among its unique input and output
characteristics is the capability for both input and output rail-to-rail
operation, particularly critical in low voltage applications. The output
swings to less than 50 mV of both rails across the entire power
supply range. The NE/SA/AU5232 is capable of delivering 5.5 V
peak-to-peak across a 600 Ω load and will typically draw only
700 µA per amplifier. The bandwidth is 2.5 MHz and the 1% settling
time is 1.4 µs.
FEATURES
• Wide common-mode input voltage range: 250 mV beyond both
rails
• Output swing within 50 mV of both rails
• Functionality to 1.8 V typical
• Low current consumption: 700 µA per amplifier
• ±15 mA output current capability
• Unity gain bandwidth: 2.5 MHz
• Slew rate: 0.8 V/µs
• Low noise: 33 nV/√Hz
• Electrostatic discharge protection
• Short-circuit protection
• Output inversion prevention
PIN CONFIGURATION
1
2
3
45
6
7
8
–+
+
–
AB
V+
OUTPUT B
INVERTING INPUT B
NON INVERTING INPUT B
OUTPUT A
INVERTING INPUT A
NON INVERTING INPUT A
V–
D, N Packages
SL01163
Figure 1. Pin configuration.
APPLICATIONS
• Automotive electronics
• Signal conditioning and sensing amplification
• Portable instrumentation
– Test and measurement
– Medical monitors and diagnostics
– Remote meters
• Audio equipment
• Security systems
• Communications
– Pagers
– Cellular telephone
– LAN
– 5 V Datacom bus
• Error amplifier in motor drives
• Transducer buffer amplifier
ORDERING INFORMATION
ORDER CODE DESCRIPTION TEMPERATURE RANGE DWG #
NE5232D 8-Pin Plastic Small Outline (SO) package 0 °C to +70 °C SOT96-1
NE5232N 8-Pin Plastic Dual In-Line Package (DIP) 0 °C to +70 °C SOT97-1
SA5232D 8-Pin Plastic Small Outline (SO) package –40 °C to +85 °C SOT96-1
SA5232N 8-Pin Plastic Dual In-Line Package (DIP) –40 °C to +85 °C SOT97-1
AU5232N 8-Pin Plastic Dual In-Line Package (DIP) –40 °C to +125 °C SOT97-1
AU5232D 8-Pin Plastic Small Outline (SO) package –40 °C to +125 °C SOT96-1
Philips Semiconductors Product data
NE/SA/AU5232
Matched dual high-performance
low-voltage operational amplifier
2002 May 21
3
ABSOLUTE MAXIMUM RATINGS
SYMBOL PARAMETER RATING UNIT
V
CC
Single supply voltage 7 V
ESD protection voltage at any pin
5
V
ESD
human body model 2000 V
robot model 200 V
V
S
Dual supply voltage ±3.5 V
V
DP
Voltage at any device pin
1
V
S
± 0.5 V
I
DP
Current into any device pin
1
±50 mA
V
i(dif)
Differential input voltage
2
0.5 V
V
i(CM)
Common-mode input voltage (positive) V
CC
+ 0.5 V
V
i(CM)
Common-mode input voltage (negative) V
EE
– 0.5 V
P
D
Power dissipation
3
500 mW
T
j
Operating junction temperature
3
+150 °C
V
SC
Supply voltage allowing indefinite output short circuit to either rail
3,4
7 V
T
stg
Storage temperature range –65 to +150 °C
T
sld
Lead soldering temperature (10 sec max) +230 °C
Thermal impedance
θ
JA
8-pin plastic DIP °C/W
8-pin plastic SO °C/W
NOTES:
1. Each pin is protected by ESD diodes. The voltage at any pin is limited by the ESD diodes.
2. The differential input of each amplifier is limited by two internal diodes, connected in parallel and opposite to each other. For more differential
input range, use differential resistors in series with the input pins.
3. The maximum operating junction temperature is +150 °C. At elevated temperatures, devices must be derated according to the package
thermal resistance and device mounting conditions. Derates above +25 °C: N package at 9.5 mW/°C; D package at 6.25 mW/°C.
4. Simultaneous short circuits of two amplifiers to the positive or negative rail can exceed the power dissipation ratings and cause eventual
destruction of the device.
5. Guaranteed by design.
RECOMMENDED OPERATING CONDITIONS
SYMBOL PARAMETER RATING UNIT
V
CC
Single supply voltage +2 to +5.5 V
V
S
Dual supply voltage ±1 to ±2.75 V
V
i(CM)
Common-mode input voltage (positive) V
CC
+ 0.25 V
V
i(CM)
Common-mode input voltage (negative) V
EE
– 0.25 V
Temperature
T
amb
NE 0 to +70 °C
T
am
b
SA –40 to +85 °C
AU –40 to +125 °C
P1-P3P4-P6P7-P9P10-P10

SA5232D/01,112

Mfr. #:
Buy SA5232D/01,112
Manufacturer:
NXP Semiconductors
Description:
IC OPAMP GP 2 CIRCUIT 8SO
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet