NFM15PC104D0J3D Datasheet NFM15PC104D0J3D | P4-P6

Environment Performance

It shall be soldered on the glass-epoxy substrate.

No Specification Test Method

1 Temperature Cycling Meet Table 4.

1 Cycle

Table 4 　 1 step : Minimum Operating Temperature

+0 / -3°C / 30+3 / -0 min

　 2 step : Room Temperature / within 3 min

　 3 step : Maximum Operating Temperature

+3 / -0°C / 30 +3 / -0 min

　 4 step : Room Temperature / within 3 min

Total of 10 cycles

Initial values : measured after heat treatment(150+0 / -10°C

,1hour) and exposure in the room condition for 48±4 hours.

Then measured after exposure in the room condition for 48±4

hours.

If it’s doubt, the mesuring has to be done after 1 hours

curing at 150+0 / -10°C and 48±4 hours storage.

2 Humidity Meet Table 5. Temperature : 40±2°C

Table 5 Humidity : 90 to 95%(RH)

Time : 500+24 / -0 hours

Initial values: measured after heat treatment (150+0 / -10°C ,

1hour) and exposure in the room condition for 48±4 hours.

Then measured after exposure in the room condition for 48±4

hours.

If it ’ s doubt, the mesuring has to be done after 1 hours

curing at 150+0 / -10°C and 48±4 hours storage.

3 Heat Life Temperature : : Maximum Operating Temperature ± 2 °C

Test Voltage : Rated Voltage x 150%

Charge Current : 50 mA max.

Time : 1000+48 / -0 hours

Initial values: measured after heat treatment (150+0 / -10°C ,

1hour) and exposure in the room condition for 48±4 hours.

Then measured after exposure in the room condition for 48±4

hours.

If it’s doubt, the mesuring has to be done after 1 hours curing

at 150+0 / -10°C and 48±4 hours storage.

■SPECIFICATIONS AND TEST METHODS

Item

Appearance

No damaged

Cap. Change

Within ±12.5%

I.R.

Meet the initial rated

value.

Resistance

0.05 max.

Appearance

No damaged

Cap. Change

Within ±12.5%

I.R.

473,104

224,474

105M min.

105

25M min.

435

5M min.

Resistance

0.05max.

JEMCPS-02208C 4

1. Appearance and Dimensions (8mm-wide paper tape)

<Fig.1>

(in:mm)

<Fig.2>

NFM15CC series

NFM15PC473/104/224/435

Fig. Fig.1 Fig.1 Fig.2 Fig.2

0.65　* 0.75　* 0.72　* 0.78　*

1.15　* 1.15　* 1.29　* 1.29　*

0.6 max. 0.75 max. 0.9 max. 0.9 max.

*typical

2. Specification of Taping

(1) Packing quantity (standard quantity)

10,000 pcs. / reel

(2) Packing Method

Products shall be packaged in the cavity of the base tape and sealed by cover tape.

(3) Sprocket Hole

The sprocket holes are to the right as the tape is pulled toward the user.

(4) Base tape and Cover tape

The base tape and Cover tape have no spliced point.

(5) Cavity

There shall not be burr in the cavity.

(6) Missing components number

Missing components number within 0.1% of the number per reel or 1 pc., whichever is greater,and are not continuous.

The specified quantity per reel is kept.

3. Pull Strength of Cover tape

5Nmin.

4. Peeling off force of Cover tape

0.1N to 0.6N (minimum value is typical)

Speed of Peeling off : 300 mm / min

5. Dimensions of Leader-tape, Trailer and Reel

There shall be leader-tape (cover tape and empty tape) and trailer-tape (empty tape) as follows.

(in mm)

P A C K A G I N G

NFM15 Type

Code

NFM15PC474/105

NFM15PC755

NFM15PC915

Label

0.62±0.04

1.5

0.6

max.

8.0

0.2

3.5

0.05

0.1

1.12±0.04

2.0±0.05

4.0±0.1

1.75±0.1

2.0±0.05

0.62±0.04

1.5

0.6

max.

8.0

0.2

3.5

0.05

0.1

1.12±0.04

2.0±0.05

4.0±0.1

1.75±0.1

2.0±0.05

0.62±0.04

1.5

0.6

max.

8.0

0.2

3.5

0.05

0.1

1.12±0.04

2.0±0.05

4.0±0.1

1.75±0.1

2.0±0.05

0.62±0.04

1.5

0.6

max.

8.0

0.2

3.5

0.05

0.1

1.12±0.04

2.0±0.05

4.0±0.1

1.75±0.1

2.0±0.05

(in mm)

Empty tape

190 min.

Leader

Trailer

Cover tape

2.0±0.5

13.0±0.2

21.0±0.8

180±

60±

9±

13±1.4

Direction of feed

210 min.

160 min.

Label

JEMCPP-02230D 5

Caution

1. Mounting density

Add special attention to radiating heat of products when mounting this product near the products with heating.

The excessive heat by other products may cause deterioration of insulation resistance and excessive heat at this product,

resulting in a fire.

2. Limitation of Applications

Please contact us before using our products for the applications listed below which require especially high

reliability for the prevention of defects which might directly cause damage to the third party's life, body or property.

　(1)Aircraft equipment (2)Aerospace equipment (3)Undersea equipment (4)Power plant control equipment

　 (5)Medical equipment (6)Transportation equipment(automobiles, trains, ships, etc.) (7)Traffic signal equipment

　 (8)Disaster prevention / crime prevention equipment (9)Data-processing equipment

　 (10)Applications of similar complexity or with reliability requirements comparable to the applications listed in the above

JEMCPC-02243B 6

P1-P3 P4-P6 P7-P9 P10-P10

NFM15PC104D0J3D

Mfr. #:

Buy NFM15PC104D0J3D

Manufacturer:

Description:

Thermistors - NTC 0402 100Kohms

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

NFM15PC104D0J3D