EVAL-ADF4007EBZ1 Datasheet EVAL-ADF4007EBZ1 | P7-P8

Evaluation Board User Guide UG-158

Rev. 0 | Page 7 of 8

ORDERING INFORMATION

BILL OF MATERIALS

Table 1.

Reference Designator Part Description Manufacturer/Part No.

C1 Capacitor+, 22 μF, 6.3 V, CAP\TAJ_A FEC 197-038

C2, C4, C6, C8 Capacitor, 10 pF, 0603 FEC 499-110

C3, C5, C7, C28 Capacitor, 0.1 μF, 0603 FEC 499-675

C9, C10, C13 to C16 Capacitor, 1 nF, 0603 FEC 317-202

C12 Capacitor, 0603

C17, C20, C23 Capacitor+, 1 μF, 25 V, CAP\TAJ_A FEC 197-476

C18, C21 Capacitor+, 4.7 μF,10 V, CAP\TAJ_A FEC 498-658

C19, C22 Capacitor, 10 nF, 0603 FEC 499-146

C24 Capacitor+, 4.7 μF, 25 V, CAP\TAJ_B FEC 197-506

C25 to C27 Capacitor, 0603

C29 Capacitor+, 10 μF, 25 V, CAP\TAJ_C FEC 197-518

D1 SD103C, 6.2 V, DO35 SD103C

D2 DIODE, IN4001, DO35 FEC 365-117

D3 LED_SMT FEC 515-620

J1 to J8 SMA_CARD_EDGE Pasternack PE4542

J9 Banana, red FEC 150-039

J10 Banana, black FEC 150-040

LK1 JUMPER2\SIP3, LINK-3P Futura JSC-16-GO

M1, M2, N1, N2 JUM_CHANGE_1, LINK-3P-NOTEXT Futura JSC-16-GO

R1 to R4, R13, R16, R22 to R25 Resistor, 0 Ω, 0603 FEC 772-227

R5, R11 Resistor, 51 Ω, 0603 Digikey 311-51.0HCT-ND

R6 Resistor, 4.7 kΩ, 0603 FEC 911-318

R7 Resistor, 10 kΩ, 0603 FEC 911-355

R8 to R10 Resistor, 18 Ω, 0603 FEC 911-021

R12, R14 Resistor, 330 kΩ, 0603 FEC 911-537

R15 Resistor, 4.7 kΩ, 0805 FEC 911-938

R17 to R19 Resistor, 0603

R20 Resistor, 1 kΩ, 0603 FEC 911-XXX

R21 Resistor, 10 kΩ, 0603 FEC 911-355

SW1 SW_POWER, SW_SIP-3P FEC 150-559

T1 to T8, T11, T12 Test point

U1 ADF4007, CSP-20 ADF4007BCP

U2 ADP3300, SOT23-6 ADP3300ART-3

U3 ADP3300, SOT23-6 ADP3300ART-5

U4 7812, TO-92 FEC 563-766

U5 OP27GS, SO8NB OP27GS

Y1 OSC_TCXO, 10.0 MHz

UG-158 Evaluation Board User Guide

Rev. 0 | Page 8 of 8

NOTES

ESD Caution

ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection

circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.

Legal Terms and Conditions

By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions

set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you

have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc.

(“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal,

temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided

for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional

limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term

“Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including

ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may

not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to

promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engi

neer chips on the Evaluation Board. Customer shall inform ADI of any

occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board.

Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice

to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO

WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED

TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL

PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF

THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE

AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable

United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of

Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby

submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed.

registered trademarks are the property of their respective owners.

UG09143-0-12/10(0)

P1-P3 P4-P6 P7-P8

EVAL-ADF4007EBZ1

Mfr. #:

Buy EVAL-ADF4007EBZ1

Manufacturer:

Analog Devices Inc.

Description:

BOARD EVALUATION FOR ADF4007EB1

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

EVAL-ADF4007EBZ1