Description STM32F769I-EVAL
2/4 DocID029090 Rev 1
1 Description
The STM32F769I-EVAL evaluation board is a complete demonstration and development
platform for STMicroelectronics ARM
®
Cortex
®
-M7 core-based STM32F769NI
microcontrollers. It features the following interfaces: four I
2
Cs, six SPIs with three
multiplexed full-duplex I
2
S, SDIO, two SAIs, 8- to 14-bit digital camera module, Ethernet
MAC, FMC and Quad-SPI. It also features four USART and four UART peripherals, two
CAN bus, three 12-bit ADC converters, two 12-bit DAC channels, internal 256+4-Kbyte
SRAM and 2-Mbyte Flash memory, USB HS OTG and USB FS OTG peripherals, JTAG
debugging support. This evaluation board can be used as a reference design for user
application development but it is not considered as a final application.
The full range of hardware features on the board helps the user to evaluate all the
peripherals (USB OTG HS, USB OTG FS, Ethernet, motor control, CAN, microSD card,
USART, audio DAC and ADC, digital microphone, CAN, SRAM, NOR Flash, SDRAM,
Quad-SPI Flash, 4" DSI LCD with capacitive touch panel etc.) and to develop applications.
Extension headers make it possible to easily connect a daughterboard for a specific
application.
The integrated ST-LINK/V2-1 provides an embedded in-circuit debugger and programmer
for the STM32.
2 Ordering information
To order the evaluation board with the STM32F769NI MCU, use the order code:
STM32F769I-EVAL.