Special design
Low-inductance design
Design Identification in third
block of ordering code
Remark
Low inductance (13 nH) M003 For capacitors with diameter d ≥ 76.9 mm
Accessories
The following items are included in the delivery package, but are not fastened to the capacitors:
Thread Toothed
washers
Screws/nuts Maximum
torque
For terminals M5 A 5.1 DIN 6797 DIN 7985 / ISO 7045-M5 × 10-5.6-Z 2.5 Nm
thread depth
t ≥ 8 mm
M6 A 6.4 DIN 6797 DIN 7985 / ISO 7045-M6 × 12-5.6-Z 4.0 Nm
thread depth
t ≥ 9.5 mm
For mounting M12 J 12.5 DIN 6797 Hex nut BM 12 DIN 439 10 Nm
The following items must be ordered separately. For details, refer to chapter "Capacitors with
screw terminals Accessories".
Item Type
Ring clips B44030
Clamps for capacitors with d ≥ 64.3 mm B44030
Insulating parts B44020
B43750, B43770
Extremely high ripple current 105 °C
Page 6 of 16Please read Cautions and warnings and
Important notes at the end of this document.
