OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

810M1-0100X

P1-P3
SENSOR SOLUTIONS /// Model 810M1 Rev A 9/2015
Page 1
Direction of measurement must be specified at time of
order. See Ordering Info on page
MODEL 810M1 ACCELEROMETER
SPECIFICATIONS
Piezoelectric Linear Accelerometer
±25g & ±100g Dynamic Ranges
Wide Bandwidth to 6000Hz
Circuit Board Mountable
The Model 810M1 is a low cost, board mountable
accelerometer designed for general purpose vibration
measurements. The accelerometer is available in ±25g or
±100g range and provides a flat frequency response up to
>6kHz. Featuring stable piezo-ceramic crystals in shear
mode, the accelerometer incorporates an amplified ±1.25V
output and is offered in two measurement direction options
(X or Z axis).
FEATURES
Two Measurement Directions
3.3 to 5.5Vdc Excitation Voltage
Hermetically Sealed
Piezo-Ceramic Shear Design
-40° to +125°C Operating Range
APPLICATIONS
Asset Monitoring
Data Loggers
Impact Monitoring
Machine Health Monitoring
System Wake-Up Switch
DIMENSIONS
MODEL 810M1 ACCELEROMETER
SENSOR SOLUTIONS /// Model 810M1 Rev A 9/2015
Page 2
PERFORMANCE SPECIFICATIONS
All values are typical at +24°C, 80Hz and 3.3Vdc excitation unless otherwise stated. Measurement Specialties reserves the right to
update and change these specifications without notice.
Parameters
DYNAMIC
Notes
Range (g)
±25
±100
Sensitivity (mV/g)
50.0
12.5
±30%
Frequency Response (Hz)
2-6000
2-6000
±1dB
Resonant Frequency (Hz)
>30000
>30000
Non-Linearity (%FSO)
±2
±2
Transverse Sensitivity (%)
<8
<8
Shock Limit (g)
2000
2000
Residual Noise (g RMS)
0.0026
0.0032
2Hz to 10kHz
Spectral Noise, 10Hz (µg√Hz)
160
160
Spectral Noise, 100Hz (µg√Hz)
40
40
Spectral Noise, 1kHz (µg√Hz)
16
16
ELECTRICAL
Bias Voltage (Vdc)
Excitation Voltage / 2
Full Scale Output Voltage (V)
±1.25
Total Supply Current (µA)
22
Excitation Voltage (Vdc)
3.3 to 5.5
Output Impedance (Ω)
<100
Insulation Resistance (MΩ)
>100
@100Vdc
Shielding
100%
Warm-up Time (msec)
30
ENVIRONMENTAL
Temperature Response (%)
-20/+30 from -40°C to +125°C
Operating Temperature (°C)
-40 to +125
Storage Temperature (°C)
-40 to +125
Humidity
Hermetically Sealed
PHYSICAL
Sensing Element
Ceramic (shear mode)
Case Material
Ceramic Base, Nickel Silver Cover
Weight (grams)
3.0
Mounting
Solder
Calibration supplied: CS-SENS-0100 NIST Traceable Amplitude Calibration at 80Hz
The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this
information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the
right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the
suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or
circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different
applications. All operating parameters must be validated for each customer application by customer’s technical experts. Measurement Specialties, Inc. does not
convey any license under its patent rights nor the rights of others.
MODEL 810M1 ACCELEROMETER
SENSOR SOLUTIONS /// Model 810M1 Rev A 9/2015
Page 3
ORDERING INFORMATION
PART NUMBERING Model Number+Range+Measurement Direction
810M1-GGGGX
l l______ Measurement Direction (X is X-axis, Z is Z-axis)
l_________ Range (0025 is 25g)
Example: 810M1-0025X
Model 810M1, X-axis Measurement, 25g
TE.com/sensorsolutions
Measurement Specialties, Inc., a TE Connectivity company.
Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein
might be trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes
no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard
Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse
of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application.
© 2015 TE Connectivity Ltd. family of companies All Rights Reserved.
NORTH AMERICA
Measurement Specialties, Inc.,
a TE Connectivity Company
1000 Lucas Way
Hampton, VA 23666
Sales and Customer Service
Tel: +1-800-745-8008 or
+1-757-766-1500
Fax: +1-757-766-4297
t&m@meas-spec.com
EUROPE
MEAS France SAS
a TE Connectivity Company
26 Rue des Dames
F78340 Les Clayes-sous-Bois
France
Sales and Customer Service
Tel: +33 (0) 1 79 33 00
Fax: +33(0)1 34 81 03 59
t&m@meas-spec.com
ASIA
Measurement Specialties (China), Ltd.,
a TE Connectivity Company
No. 26 Langshan Road
Shenzhen High-Tech Park (North)
Nanshan District, Shenzhen 518057
China
Sales and Customer Service
Tel: +86 755 3330 5088
Fax: +86 755 3330 5099
t&m@meas-spec.com
P1-P3

810M1-0100X

Mfr. #:
Buy 810M1-0100X
Manufacturer:
TE Connectivity
Description:
Motion & Position Sensors Accelerometers MODEL 810M1 ACCELEROMETER
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet