https://www.phoenixcontact.com/pi/products/2906032
08/18/2018Page3/6
Electronic device circuit breaker-CBMC E4 24DC/1-10A NO-2906032
Technical data
Electrical data
Undervoltage shutdown load circuit ≤ 17.8 V DC (active)
≥ 18.8 V DC (inactive)
Surge voltage shutdown load circuit ≥ 30.5 V DC (active)
≤ 29.5 V DC (inactive)
Max. capacitive load load circuit
45000 µF (Depending on the current setting and the short-circuit current
available)
Remote indication contact
Connection name Remote indication circuit
Switching function N/O contact
Stripping length 10 mm
Conductor cross section solid 0.2 mm² ... 2.5 mm²
Conductor cross section AWG 24 ... 12
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 1.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 2.5 mm²
DC operating voltage 0 V DC ... 30 V DC
DC operating current 100 mA DC
Signaling
Channel LED off off (Channel switched off)
Channel LED green lit (Channel switched on)
Channel LED yellow lit (Channel switched on, channel load>80%)
flashing (Programming mode active)
Channel LED red lit (Channel switched off, over- or undervoltage active)
ON temporarily (Channel switched off, 5s cool-down phase, overload or
short-circuit release)
flashing (Channel switched off, ready to be switched back on, overload
or short-circuit release)
two flashes (Channel switched off, device total current limit 40A
exceeded)
Connection data
Connection name Main circuit IN+
Connection method Push-in connection
Stripping length 15 mm
Conductor cross section solid 0.2 mm² ... 10 mm²
Conductor cross section AWG 24 ... 8
Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 4 mm²
Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 6 mm²
Connection name Main circuit IN-
Connection method Push-in connection
Stripping length 10 mm
Conductor cross section solid 0.2 mm² ... 2.5 mm²
Conductor cross section AWG 24 ... 12