OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

AA2810ASURSK

P1-P3P4-P6
SPEC NO: DSAK2444 REV NO: V.2 DATE: APR/13/2011 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005912
2.8X0.8mm RIGHT ANGLE SMD CHIP LED
LAMP
Part Number: AA2810ASURSK Hyper Red
Features
z 2.8mmX0.8mm right angle SMT LED, 1.2mm thickness.
z Low power consumption.
z Ideal for backlight and indicator.
z Various colors and lens types available.
z Package : 2000pcs / reel.
z Moisture sensitivity level : level 3.
z RoHS compliant.
Description
The Hyper Red source color devices are made with Al-
GaInP on GaAs substrate Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.0039") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAK2444 REV NO: V.2 DATE: APR/13/2011 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005912
Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1.Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
2. As silicone encapsulation is permeable to gases, some corrosive substances such as H
2
S might corrode silver plating of
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
SPEC NO: DSAK2444 REV NO: V.2 DATE: APR/13/2011 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1201005912
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
AA2810ASURSK Hyper Red (AlGaInP) Water Clear 150 300
110
°
Iv (mcd) [2]
@ 20mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Hyper Red 650
nm I
F=20mA
λD [1] Dominant Wavelength Hyper Red 630
nm I
F=20mA
Δλ1/2 Spectral Line Half-width Hyper Red 28
nm I
F=20mA
C Capacitance Hyper Red 35
pF V
F=0V;f=1MHz
V
F [2] Forward Voltage Hyper Red 1.95 2.5 V IF=20mA
I
R Reverse Current Hyper Red
10 uA VR=5V
Parameter Hyper Red Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 185 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
P1-P3P4-P6

AA2810ASURSK

Mfr. #:
Buy AA2810ASURSK
Manufacturer:
Kingbright
Description:
Standard LEDs - SMD RA Red 630nm 300mcd 110deg Water Cl
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet