9.5
(0.374)
0.9 ± 0.1
(0.035 ± 0.004)
XX
Y
SHAFT SLOT
IS OPTIONAL
ANGLE
Y
12 3
3.5
(0.138)
4.85
(0.191)
6.5 ± 0.5
(0.256 ± 0.002)
2.0 ± 0.1
(0.079 ± 0.004)
Y
Y
XX
0.8 ± 0.2
(0.315 ± 0.008)
6.0 ± 0.2
(0.236 ± 0.008)
5.0
(0.197)
2.5
(0.098)
5.0
(0.197)
1.0 +0.1/-0
(0.039 +0.004/-0)
DIA.
MOUNTING
SURFACE
6 PLCS.
30.0 ± 0.8
(1.181 ± 0.031)
10.0
(0.394)
23.25
(0.915)
0.8 ± 0.2
(0.031 ± 0.002)
0.5
(0.020)
10.7
(0.421)
7.0
(0.276)
6.0
(0.236)
DIA.
C1
R2 R1
0.75
0.030
M7 x
1.0 ± 0.1
(0.039 ± 0.004)
9.0 ± 0.5
(0.354 ± 0.020)
PUSH TRAVEL
8.0
(0.315)
PUSH LATCH TRAVEL
6.0
(0.236)
Features
■ Carbon element
■ Assortment of resistance tapers
■ Push latching shaft
■ Flatted, knurled and slotted shaft styles
■ Center detent option
PTP90 Series Panel Control w/Push Latching Shaft
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
Specifi cations are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specifi c applications.
Electrical Characteristics
Standard Resistance Range
........................1K ohms to 1 megohm
Standard Resistance Tolerance
R < 250K ohms .........................±20 %
R ≥ 250K ohms .........................±30 %
End Resistance
R < 50K ohms .............. 30 ohms max.
R ≥ 50K ohms ......... 0.1 % of TR max.
Insulation Resistance @ 250 VDC
............................. 100 megohms min.
Dielectric Withstanding Voltage
..............................................300 VAC
Tracking Error (-40 dB to 0 dB) .....±3 dB
Standard Taper .................. Linear, Audio
Power Rating
Linear ................................... 0.05 watt
Audio .................................. 0.025 watt
Slider Noise .......................100 mV max.
Operating Voltage ....... 50 VAC / 10 VDC
Environmental Characteristics
Operational Life ................ 15,000 cycles
TR Shift .....................................±15 %
Operating Temperature Range
..................................-10 °C to +55 °C
Resistance to Solder Heat ..............±5 %
IP Rating .........................................IP 40
Mechanical Characteristics
Mechanical Angle ..................310 ° max.
Operating Torque ..............20~250 gf-cm
Stop Strength................... 4 kgf-cm max.
Mounting Torque ............ 10 kgf-cm max.
Shaft Push Latch Force ..........40~500 gf
Push Latch Operating Life
......................................10,000 cycles
Soldering Condition
Manual ........... 300 °C ±5 °C for 3 sec.
Wave .............. 260 °C ±5 °C for 5 sec.
Wash ..................... Not recommended
Hardware ................One fl at washer and
one mounting nut supplied with
each potentiometer
Product Dimensions
(Shown with Knurled Shaft)
DIMENSIONS:
MM
(INCHES)
Mounting Hole Detail
Locating Lug Detail
Standard Resistance Table
Resistance Resistance
(Ohms) Code
1,000 102
2,000 202
5,000 502
10,000 103
20,000 203
50,000 503
100,000 104
200,000 204
500,000 504
1,000,000 105
*RoHS COMPLIANT
M7 x
WASHERNUT
2.0
(.079)
0.5
(.020)
DIA.
7.2
(.283)
DIA.
11.0
(.433)
DIA.
12.7
(.500)
0.75
(.030)
DIA.
12.0
(.472)
Hardware
