VS-20ETF08S-M3, VS-20ETF10S-M3, VS-20ETF12S-M3
www.vishay.com
Vishay Semiconductors
Revision: 04-Jan-18
1
Document Number: 94887
For technical questions within your region: DiodesAmericas@vishay.com
, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Surface Mount Fast Soft Recovery Rectifier Diode, 20 A
FEATURES
• Glass passivated pellet chip junction
• Designed and qualified according to
JEDEC
®
-JESD 47
• Meets MSL level 1, per J-STD-020,
LF maximum peak of 245 °C
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Output rectification and freewheeling in inverters,
choppers and converters
• Input rectifications where severe restrictions on
conducted EMI should be met
DESCRIPTION
The VS-20ETF..S-M3 soft recovery rectifier series has been
optimized for combined short reverse recovery time and low
forward voltage drop.
The glass passivation ensures stable reliable operation in
the most severe temperature and power cycling conditions.
PRIMARY CHARACTERISTICS
I
F(AV)
20 A
V
R
800 V, 1000 V, 1200 V
V
F
at I
F
1.31 V
I
FSM
355 A
t
rr
95 ns
T
J
max. 150 °C
Snap factor 0.6
Package D
2
PAK (TO-263AB)
Circuit configuration Single
Base
cathode
+
2
13
Anode
--
Anode
MAJOR RATINGS AND CHARACTERISTICS
SYMBOL CHARACTERISTICS VALUES UNITS
I
F(AV)
Sinusoidal waveform 20 A
V
RRM
800 to 1200 V
I
FSM
355 A
V
F
20 A, T
J
= 25 °C 1.31 V
t
rr
1 A, 100 A/μs 95 ns
T
J
Range -40 to +150 °C
VOLTAGE RATINGS
PART NUMBER
V
RRM
, MAXIMUM PEAK
REVERSE VOLTAGE
V
V
RSM
, MAXIMUM NON-REPETITIVE
PEAK REVERSE VOLTAGE
V
I
RRM
AT 150 °C
mA
20ETF08S-M3 800 900
620ETF10S-M3 1000 1100
20ETF12S-M3 1200 1300
ABSOLUTE MAXIMUM RATINGS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average forward current I
F(AV)
T
C
= 97 °C, 180° conduction half sine wave 20
A
Maximum peak one cycle
non-repetitive surge current
I
FSM
10 ms sine pulse, rated V
RRM
applied 300
10 ms sine pulse, no voltage reapplied 355
Maximum I
2
t for fusing I
2
t
10 ms sine pulse, rated V
RRM
applied 450
A
2
s
10 ms sine pulse, no voltage reapplied 635
Maximum I
2
t for fusing I
2
t t = 0.1 ms to 10 ms, no voltage reapplied 6350 A
2
s