OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MP6233DH-LF-P

P1-P3P4-P6P7-P9P10-P10
MP6233
3.3V/5V, Dual-Channel 1.5A
Current-Limited Power Distribution Switch
MP6233 Rev. 1.0 www.MonolithicPower.com 1
8/21/2014 MPS Proprietary Information. Patent Protected.
Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
The Future of Analog IC Technology
DESCRIPTION
The MP6233 Power Distribution Switch features
internal current limiting to prevent damage to
host devices due to faulty load conditions. The
MP6233 analog switch includes an 85m
power MOSFET switch. It is available with
guaranteed current limits, making it ideal for
load switching applications. The MP6233 has
built-in protection for both over current and
increased thermal stress. For over current, the
device will limit the current by changing to a
constant current mode.
As the temperature increases as a result of
short circuit, the device will shut off. The device
will recover once the device temperature
reduces to approx 120°C.
The MP6233 is available in MSOP8E package.
FEATURES
• 1.5A Continuous Current
• 2.7V to 5.5V Supply Range
• 140uA Quiescent Current
• 85m MOSFET
• Thermal-Shutdown Protection
• Under-Voltage Lockout
• 8ms FLAG Deglitch Time
• No FLAG Glitch During Power Up
• Reverse Current Blocking
• UL Recognized: E322138
APPLICATIONS
• Portable GPS Device
• Notebook PC
• LCD TV
• Set-top-box
• Telecom and Network Systems
• PC Card Hot Swap
• USB Power Distribution
All MPS parts are lead-free and adhere to the RoHS directive. For MPS green
status, please visit MPS website under Quality Assurance. “MPS” and “The
Future of Analog IC Technology” are Registered Trademarks of Monolithi
c
Power Systems, Inc.
TYPICAL APPLICATION
OUT2
MP6233
DUAL-CHANNEL
OUT1
1
2
3
4
5
6
7
8
3.3V/5V Input
To USB Controller
Output 1
Output 2
FLAG1
FLAG2
EN1
IN
GND
EN2
UL Recognized Component
MP6233 –CURRENT-LIMITED POWER DISTRIBUTION SWITCH
MP6233 Rev. 1.0 www.MonolithicPower.com 2
8/21/2014 MPS Proprietary Information. Patent Protected.
Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
ORDERING INFORMATION
Part Number Enable Switch
Maximum
Continuous
Load Current
Typical Short-
Circuit Current
@ T
A
=25C
Package
Top
Marking
Temperature
MP6233DH Active High Dual 1.5A 2.3A MSOP8E 6233D
–40°C to +85°C
For Tape & Reel, add suffix –Z (eg. MP6233DH–Z); For RoHS Compliant Packaging, add suffix –LF;
(eg. MP6233DH–LF)
PACKAGE REFERENCE
GND
IN
EN1
EN2
FLAG1
OUT1
OUT2
FLAG2
1
2
3
4
8
7
6
5
TOP VIEW
EXPOSED PAD
ON BACKSIDE
CONNECT TO GND
MP6233
Dual-Channel
ABSOLUTE MAXIMUM RATINGS
(1)
IN .................................................-0.3V to +6.0V
EN, FLAG, OUT to GND ..............-0.3V to +6.0V
Junction Temperature...............................150°C
Lead Temperature ....................................260°C
Storage Temperature.............. –65°C to +150°C
Operating Temperature............. –40°C to +85°C
Thermal Resistance
(2)
θ
JA
θ
JC
MSOP8E................................. 55 ...... 12... °C/W
Notes:
1) Exceeding these ratings may damage the device.
2) Measured on JESD51-7, 4-layer PCB.
MP6233 –CURRENT-LIMITED POWER DISTRIBUTION SWITCH
MP6233 Rev. 1.0 www.MonolithicPower.com 3
8/21/2014 MPS Proprietary Information. Patent Protected.
Unauthorized Photocopy and Duplication Prohibited.
© 2014 MPS. All Rights Reserved.
ELECTRICAL CHARACTERISTICS
(3)
V
IN
=5V, T
A
=+25°C, unless otherwise noted.
Parameter
Condition Min Typ Max Units
IN Voltage Range
2.7 5.5 V
Supply Current
One Channel Enabled, I
OUT
=0, One
Switch ON
90 120 A
Supply Current
Both Channels Enabled, I
OUT
=0, Both
Switch ON
140 160 A
Shutdown Current
Device Disable, V
OUT
=float, V
IN
=5.5V 1 A
Off Switch Leakage
Device Disable, V
IN
=5.5V 1 A
Current Limit
1.6 2.3 3 A
Trip Current
Current Ramp (slew rate≤100A/s) on
Output
2.7 3.5 A
Under-voltage Lockout
Rising Edge 1.95 2.65 V
Under-voltage Hysteresis
250 mV
FET On Resistance
I
OUT
=100mA and-40°C<T
A
< 85°C 85 130 m
EN Input Logic High Voltage
2 V
EN Input Logic Low Voltage
0.4 V
FLAG Output Logic Low Voltage
I
SINK
=5mA 0.4 V
FLAG Output High Leakage
Current
V
IN
=V
FLAG
=5.5V 1 A
Thermal Shutdown
140 °C
Thermal Shutdown Hysteresis
20 °C
V
IN
=5.5V, CL=1uF, RL=5
0.9 ms
V
OUT
Rising Time, Tr
V
IN
=2.7V, CL=1uF, RL=5
1.7 ms
V
IN
=5.5V, CL=1uF, RL=5
0.5 ms
V
OUT
Falling Time, Tf
V
IN
=2.7V, CL=1uF, RL=5
0.5 ms
Turn On Time, Ton
C
L
=100F, RL=5
3 ms
Turn Off Time, Toff
C
L
=100F, RL=5
10 ms
FLAG Deglitch Time
4 8 15 ms
ENx Input Leakage
-1
A
Reverse Leakage Current
OUTX=5.5V, IN=GND 0.2 A
NOTE:
3) Production test at +25°C. Specifications over the temperature range are guaranteed by design and characterization.
P1-P3P4-P6P7-P9P10-P10

MP6233DH-LF-P

Mfr. #:
Buy MP6233DH-LF-P
Manufacturer:
Monolithic Power Systems (MPS)
Description:
Power Switch ICs - Power Distribution 3.3/5V 2-Ch 1.5A Current Limit PDS
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet