REVISIONS
DRAWING NUMBER
REV.
Millimeters
2 Place Dec.
1 Place Dec.
When Unspecified
Scale :
Inches
2 Place Dec.
3 Place Dec.
Fractions
-
+
-
+
+
-
Angles
TOLERANCES
DRAWING NUMBER
Dwn.
App'd.
TITLE
-
+
-
+
+
-
Standex
Electronics
a
Standex
company
DATE
CINCINNATI
OHIO
REV.
This drawing and the information and technical data contained hereon,
are confidential and proprietary to Standex Electronics and shall
not be used in whole or in part without Standex written consent
FSC 5002U
4/2/2012CCR
N/A
FSC 5002U 3
3
1
INITIAL RELEASE
4/3/12 DCJ
2
ADD
INSTALLATION
INSTRUCTIONS;
ADD WATER
LEVEL; ADD
DIMENSIONS
10/25/12 DCJ
3
ADD MARKING
DETAIL VIEW
1/8/13 DCJ
.005
.01
1°
4/3/2012DCJ
FPS-B
NOTES:
1. FLOAT MATERIAL: POLYPROPYLENE, WHITE
2. HOUSING AND RETAINER RING MATERIAL: POLYPROPYLENE , BLACK
3. BRACKET MATERIAL: 22 GA, 304 2B STAINLESS STEEL
4. O-RING MATERIAL: SILICONE
5. OPERATING TEMPERATURES UP TO 70°C
6. STORAGE TEMPERATURE UP TO 105°C
7. ELECTRICAL CHARACTERISTICS:
- POWER RATING (MAX) 50VA
- SWITCHING VOLTAGE (MAX) 200 VDC, 150 VAC
- BREAKDOWN VOLTAGE (MIN) 250VDC
- CONTACT ARRANGEMENT SPST
- SWICHING CURRENT (MAX) 1.5 A DC, 1.5 A AC
- CARRY CURRENT (MAX) 2.5 A DC, 2.5 A AC
- CONTACT RESISTANCE 100 m
- INSULATION RESISTANCE (MIN) 10¹²
- SWITCH AGENCY LISTED UL E122752
8. WIRE CONNECTIONS: 18AWG UL1007/1569 OR UL2468
9. FLOAT SPECIFIC GRAVITY: 0.75 (REFERENCE ONLY)
10. PLASTIC MATERIAL REGULATORY COMPLIANCE: FDA, RoHS, UL
11. CONFORMS TO UL508
12. MUST PASS MINUMUM OF 30 LBS. WIRE PULL TEST USING DEAD
WEIGHT FOR ONE MINUTE
INSTALLATION INSTRUCTIONS
* SLIDE BRACKET CLIP OVER SIDE OF PAN
* SECURE BRACKET WITH TAPE AS NEEDED
* ADJUST THREAD POSITION TO SET SENSOR ACTIVATION HEIGHT
* REMOVE SENSOR TO CLEAN & INSPECT
BOM FOR PACKAGE
ITEM QTY.
SENSOR 1
ADJUSTMENT NUT 2
BRACKET 1
DRAIN PAN BRACKET
SENSOR
ADJUSTMENT NUT
ADJUSTMENT NUT
WIRE: 6 FEET
1.13"
1.02"
2.18"
O .80"
.56" ±.09
SENSOR ACTIVATION
WATER LEVEL @
MARKING
DETAIL
MARKING LOCATION
