1
HIP6602B
Dual Channel Synchronous Rectified
Buck MOSFET Driver
The HIP6602B is a high frequency, two power channel
MOSFET driver specifically designed to drive four power
N-Channel MOSFETs in a synchronous rectified buck
converter topology. This device is available in either a
14-lead SOIC or a 16-lead QFN package with a PAD to
thermally enhance the package. These drivers combined
with a HIP63xx or ISL65xx series of Multi-Phase Buck PWM
controllers and MOSFETs form a complete core voltage
regulator solution for advanced microprocessors.
The HIP6602B drives both upper and lower gates over a
range of 5V to 12V. This drive-voltage flexibility provides the
advantage of optimizing applications involving trade-offs
between switching losses and conduction losses.
The output drivers in the HIP6602B have the capacity to
efficiently switch power MOSFETs at high frequencies. Each
driver is capable of driving a 3000pF load with a 30ns
propagation delay and 50ns transition time. This device
implements bootstrapping on the upper gates with a single
external capacitor and resistor required for each power
channel. This reduces implementation complexity and allows
the use of higher performance, cost effective, N-Channel
MOSFETs. Adaptive shoot-through protection is integrated
to prevent both MOSFETs from conducting simultaneously.
Features
• Drives Four N-Channel MOSFETs
• Adaptive Shoot-Through Protection
• Internal Bootstrap Devices
• Supports High Switching Frequency
- Fast Output Rise Time
- Propagation Delay 30ns
• Small 14-Lead SOIC Package
• Smaller 16-Lead QFN Thermally Enhanced Package
• 5V to 12V Gate-Drive Voltages for Optimal Efficiency
• Three-State Input for Bridge Shutdown
• Supply Undervoltage Protection
• Pb-Free Plus Anneal Available (RoHS Compliant)
• QFN Package:
- Compliant to JEDEC PUB95 MO-220
QFN - Quad Flat No Leads - Package Outline
- Near Chip Scale Package footprint, which improves
PCB efficiency and has a thinner profile
Applications
• Core Voltage Supplies for Intel Pentium® III
and AMD®
Athlon
TM
Microprocessors.
• High-Frequency, Low-Profile DC/DC Converters
• High-Current, Low-Voltage DC/DC Converters
Ordering Information
PART NUMBER
TEMP.
RANGE (°C) PACKAGE
PKG.
DWG. #
HIP6602BCB 0 to 85 14 Ld SOIC M14.15
HIP6602BCB-T 14 Ld SOIC Tape and Reel
HIP6602BCBZ (Note 1) 0 to 85 14 Ld SOIC
(Pb-Free)
M14.15
HIP6602BCBZ-T (Note 1) 14 Ld SOIC Tape and Reel (Pb-Free)
HIP6602BCR 0 to 85
16 Ld 5x5 QFN
L16.5x5
HIP6602BCR-T 16 Ld 5x5 QFN Tape and Reel
HIP6602BCRZ (Note 1) 0 to 85
16 Ld 5x5 QFN
(Pb-Free)
L16.5x5
HIP6602BCRZ-T (Note 1) 16 Ld 5x5 QFN Tape and Reel (Pb-Free)
HIP6602BCRZA (Note 1) 0 to 85
16 Ld 5x5 QFN
(Pb-Free)
L16.5x5
HIP6602BCRZA-T (Note 1) 16 Ld 5x5 QFN Tape and Reel (Pb-Free)
NOTE:
1. Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations.
Intersil Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
Data Sheet
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Intersil (and design) is a trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2002-2005, 2015. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
FN9076.6December 3, 2015
N
O
T
R
E
C
O
M
M
E
N
D
E
D
F
O
R
N
E
W
D
E
S
I
G
N
S
I
N
T
E
R
S
I
L
R
E
C
O
M
M
E
N
D
S
:
I
S
L
6
6
1
2
,
I
S
L
6
6
1
2
A
,
I
S
L
6
6
1
3
,
I
S
L
6
6
1
3
A
,
I
S
L
6
6
1
4
,
I
S
L
6
6
1
4
A
,
I
S
L
6
6
2
2
,
I
S
L
6
6
2
5
A