OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

106137-HMC370LP4

P1-P3P4-P6P7-P7
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
FREQ. MULTIPLIERS - ACTIVE - SMT
7
7 - 48
-60
-50
-40
-30
-20
-10
0
10
0 2 4 6 8 101214161820222426
OUTPUT POWER (dBm)
FREQUENCY (GHz)
Output Spectrum
-160
-140
-120
-100
-80
-60
-40
-20
0
10
2
10
3
10
4
10
5
10
6
10
7
Pin = 0 dBm
Pin = -10 dBm
SSB PHASE NOISE (dBc/Hz)
OFFSET FREQUENCY (Hz)
SSB Phase Noise
Performance, Fout= 15.0 GHz
HMC370LP4 / 370LP4E
SMT GaAs HBT MMIC x4 ACTIVE
FREQUENCY MULTIPLIER, 14.4 - 16.4 GHz OUTPUT
v03.0907
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
FREQ. MULTIPLIERS - ACTIVE - SMT
7
7 - 49
Absolute Maximum Ratings
Outline Drawing
Typical Supply Current vs. Vcc
Vcc (V) Icc (mA)
4.5 54
5.0 55
5.5 57
RF Input (Vcc = +5V) +20 dBm
Vcc +5.5V
Channel Temperature 135 °C
Continuous Pdiss (T=85 °C)
(derate 8.1 mW/°C above 85 °C)
530 mW
Thermal Resistance (R
th
)
(junction to ground paddle)
123.6 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
Note: Multiplier will operate over full voltage range shown
above.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Part Number Package Body Material Lead Finish MSL Rating Package Marking
[3]
HMC370LP4 Low Stress Injection Molded Plastic Sn/Pb Solder
MSL1
[1]
H370
XXXX
HMC370LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
MSL1
[2]
H370
XXXX
[1] Max peak re ow temperature of 235 °C
[2] Max peak re ow temperature of 260 °C
[3] 4-Digit lot number XXXX
Package Information
HMC370LP4 / 370LP4E
SMT GaAs HBT MMIC x4 ACTIVE
FREQUENCY MULTIPLIER, 14.4 - 16.4 GHz OUTPUT
v03.0907
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
FREQ. MULTIPLIERS - ACTIVE - SMT
7
7 - 50
Pin Description
Pin Number Function Description Interface Schematic
1, 2, 5-14, 17,
18, 20-24
N/C
The pins are not connected internally; however, all
data shown herein was measured with these pins
connected to RF/DC ground externally.
3RFIN
RF input needs to be DC blocked only if there is an
external DC voltage applied to RF IN.
4, 15 GND
All ground leads and ground paddle must be soldered
to PCB RF/DC ground.
16 RFOUT
Multiplied Output. AC coupled. No external DC blocks
necessary.
19 Vcc Supply voltage 5V ± 0.5V.
HMC370LP4 / 370LP4E
SMT GaAs HBT MMIC x4 ACTIVE
FREQUENCY MULTIPLIER, 14.4 - 16.4 GHz OUTPUT
v03.0907
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
P1-P3P4-P6P7-P7

106137-HMC370LP4

Mfr. #:
Buy 106137-HMC370LP4
Manufacturer:
Analog Devices / Hittite
Description:
RF Development Tools Eval PCB
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet