SSG-01L1T Datasheet SSG-5L3H, SSG-01L1H, SSG-01L2P | P1-P3

SSG Subminiature Basic Switch

Global Subminiature Basic Switch

Conforming to EN61058-1 (IEC601058-1),

UL1054, and CSA C22.2 No.54

■ A wide operating temperature range of –25°C to

125°C is available for at high-temperature use.

■ PCB terminal models are resistant to flux.

■ Even-pitched PCB terminals.

■ Mounting hole size of M2.2.

Ordering Information

■ Model Number Legend

1. Ratings

5: 5 A at 125 VAC

01: 0.1 A at 125 VAC

2. Actuator

None: Pin plunger

L1: Hinge lever

L2: Hinge roller lever

L3: Simulated roller lever

3. Contact Form

None: SPDT

-2: SPST-NC

-3: SPST-NO

4. Terminals

H: Solder terminals

T: Quick-connect terminals (#110)

P: PCB terminals (SPDT only)

5. Maximum Operating Force

None: 1.5 N {153 gf}

-5: 0.5 N {51 gf}

Note: These values are for the pin plunger models.

RoHS Compliant

ERC

SSG-@@@@@

1 2 3 4 5

SSGSSG

■ List of Models

Note: Consult your OMRON sales representative for details on SPST-NO and SPST-NC models.

Specifications

■ Ratings

Note: 1. The above current ratings are the values of the steady-state current.

2. If the Switch is used in a DC circuit and is subjected to a surge current, connect a surge suppressor across the switch.

3. The ratings values apply under the following test conditions:

Ambient temperature: 20±2°C

Ambient humidity: 65±5%

Operating frequency: 30 operations/min

Actuator Rating OF max. Solder termi-

nals

Quick-connect

terminals (#110)

PCB terminals

5 A 1.50 N {153 gf} SSG-5H SSG-5T SSG-5P

0.50 N {51 gf} SSG-5H-5 SSG-5T-5 SSG-5P-5

0.1 A 1.50 N {153 gf} SSG-01H SSG-01T SSG-01P

0.50 N {51 gf} SSG-01H-5 SSG-01T-5 SSG-01P-5

5 A 0.60 N {61 gf} SSG-5L1H SSG-5L1T SSG-5L1P

0.20 N {20 gf} SSG-5L1H-5 SSG-5L1T-5 SSG-5L1P-5

0.1 A 0.60 N {61 gf} SSG-01L1H SSG-01L1T SSG-01L1P

0.20 N {20 gf} SSG-01L1H-5 SSG-01L1T-5 SSG-01L1P-5

5 A 0.60 N {61 gf} SSG-5L3H SSG-5L3T SSG-5L3P

0.20 N {20 gf} SSG-5L3H-5 SSG-5L3T-5 SSG-5L3P-5

0.1 A 0.60 N {61 gf} SSG-01L3H SSG-01L3T SSG-01L3P

0.20 N {20 gf} SSG-01L3H-5 SSG-01L3T-5 SSG-01L3P-5

5 A 0.60 N {61 gf} SSG-5L2H SSG-5L2T SSG-5L2P

0.20 N {20 gf} SSG-5L2H-5 SSG-5L2T-5 SSG-5L2P-5

0.1 A 0.60 N {61 gf} SSG-01L2H SSG-01L2T SSG-01L2P

0.20 N {20 gf} SSG-01L2H-5 SSG-01L2T-5 SSG-01L2P-5

Models Item

Rated voltage

Resistive load

SSG-5 125 VAC 5 A

250 VAC 3 A

SSG-01 125 VAC 0.1 A

30 VDC 0.1 A

Pin plunger

Hinge lever

Simulated roller lever

Hinge roller lever

SSGSSG

■ Characteristics

Note: 1. The data given above are initial values.

2. For testing conditions, consult your OMRON sales representative.

■

Approved Standards

Consult your OMRON sales representative for specific models with standard approvals.

UL1054 (File No. E41515)/CSA C22.2 No. 55 (File No. LR21642)

EN61058-1 (File No. T9451449, TÜV Rheinland approval)

Testing conditions: 5E4 (50,000 operations), T125 (0°C to 125°C)

■

Contact Specifications

Note: For more information on the minimum applicable load, refer to Using Micro Loads on page 8.

Operating speed 0.1 mm to 1 m/s (pin plunger models)

Operating frequency Mechanical: 400 operations/min max.

Electrical: 30 operations/min max.

Insulation resistance 100 MΩ min.

Contact resistance OF 1.50 N: SSG-5 models: 30 mΩ max.

SSG-01 models: 50 mΩ max.

OF 0.50 N: SSG-5 models: 50 mΩ max.

SSG-01 models: 100 mΩ max.

Dielectric strength 1,000 VAC, 50/60 Hz for 1 min between contacts of the same polarity

(600 VAC for SSG-01H and SSG-01T models)

1,500 VAC, 50/60 Hz for 1 min between each terminal and ground

1,500 VAC, 50/60 Hz for 1 min between each terminal and non-current-carrying metal part

Vibration resistance

Malfunction: 10 to 2,000 Hz, 196 m/s

{20G} (Contact open: 10 µs max., lever position: at TTP)

Shock resistance

Malfunction: 490 m/s

{approx. 50G} (Contact open: 10 µs max., lever position: at TTP)

Durability (see note 2) Mechanical: 10,000,000 operations min. (60 operations/min)

Electrical: 200,000 operations min. (30 operations/min)

Degree of protection (IP code) IEC IP40

Degree of protection against

electrical shock

Class I

Proof tracking index 175

Ambient operating temperature –25°C to 125°C (at ambient humidity of 60% max.) (with no icing or condensation)

Ambient operating humidity 85% max. (5°C to 30°C)

Weight Approx. 1.6 g (pin plunger models)

Rated voltage SSG-5 SSG-01

125 VAC 5 A 0.1 A

250 VAC 3 A ---

30 VDC --- 0.1 A

Rated voltage SSG-5 SSG-01

250 VAC 5 A ---

30 VDC --- 0.1 A

Item SSG-5 SSG-01H.T SSG-01P

Contact Specification Rivet Crossbar Crossbar

Material Silver Gold alloy Gold alloy

Gap (standard value) 0.5 mm 0.25 mm 0.5 mm

Inrush current NC 20 A max. 1 A max. 1 A max.

NO 10 A max. 1 A max. 1 A max.

Minimum applicable load (see note) 160 mA at 5 VDC 1 mA at 5 VDC 1 mA at 5 VDC

P1-P3 P4-P6 P7-P8

SSG-01L1T

Mfr. #:

Buy SSG-01L1T

Manufacturer:

Omron Electronics

Description:

Basic / Snap Action Switches Subminiature Basic Switch

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

SSG-01L1T

SSG-01L1T

Products related to this Datasheet