U36D
LARGE CAN 85C
U36D Series
United Chemi-Con, Inc. 9801 W. Higgins Road, Rosemont, IL 60018 Tel 847-696-2000 Fax 847-696-9278 www.chemi-con.com2/13
U36D Specifications - Screw Terminals
Item
Category Temperature Range
40 to
85C
Rated Voltage Range 6.3 to 550VDC
Capacitance Range 68F to 2.2F at
25C, 120Hz
Capacitance Tolerance
20% (M) at
25C, 120Hz
Endurance
(Load Life)
The following specifications shall be satisfied when the capacitors are restored to
25C after
subjecting them to DC voltage for 2,000 hours at
85C with the rated ripple current applied.
The sum of the DC voltage and peak AC voltage must not exceed the full rated voltage of
the capacitors.
Capacitance change: ≤ 20% from initial measurement
ESR change : ≤ 300% of initial specified limit
Leakage current : ≤ initial specified limit
Shelf Life The following specifications shall be satisfied when the capacitors are restored to
25C after
exposing them for 500 hours at
85C without voltage applied. The rated voltage shall be
applied to the capacitors for a minimum of 30 minutes, at least 24 hours and not more than
48 hours before the measurements.
Capacitance change: ≤ 20% from initial measurement
ESR change : ≤ 300% of initial specified limit
Leakage current : ≤ initial specified limit
Characteristics
Leakage Current I 0.02CV (A ) or 5mA, whichever is smaller, after 5 minutes at
25C.
Where I = Max. leakage current (A ), C = Nominal capacitance (F) and V = Rated voltage ( V )
Rated Ripple Current Multipliers Ambient Temperature (C)
≤
55C
2.39
65C
2.22
75C
1.67
85C
1.00
Frequency (Hz )
3kHz
1.4
1kHz
1.3
300Hz
1.1
120Hz
1.0
50Hz
0.8
Engineering Bulletin Mar 07