DATA SHEET • CLA SERIES DIODES
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4 June 4, 2015 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200100U
Table 3. Typical Performance @ 25 °C @ 2.6 GHz, Z
0
= 50 Ω (Note 1)
Part Number
Insertion Loss
@ –10 dBm (dB)
CW Input Power
for 1 dB
Insertion Loss
(dBm)
Maximum CW
Input Power
(dBm)
Maximum
Pulsed Input
Power
(dBm) (Note 2)
Output @
Maximum
Pulsed Input
(dBm) (Note 2)
Recovery Time
(ns) (Note 3)
Spike Leakage
(ergs) (Note 4)
CLA4601-000 0.1 12 36 65 21 5 Note 5
CLA4602-000 0.1 12 36 65 24 5 Note 5
CLA4603-000 0.1 10 38 67 22 5 Note 5
CLA4604-000 0.1 12 40 70 24 5 Note 5
CLA4605-000 0.1 11 40 70 27 5 0.08
CLA4606-000 0.1 11 41 71 27 5 0.03
CLA4607-000 0.1 26 43 73 39 5 0.21
CLA4608-000 0.2 23 43 73 44 5 0.15
CLA4609-000 0.3 37 44 74 50 5 25.77
CLA4610-000 0.1 22 40 57 32 5 Note 5
CLA4611-000 0.3 25 40 60 42 450 0.6
ote 1: Diode chip is mounted on a 0.5 oz Cu PC board using 1 to 2 mils of conductive epoxy. Bond wire connections are made with 0.8 mil Au wire. Limiter configured with shunt connected
diode and 22 nH ground return and 100 pF DC blocking capacitors.
ote 2: Pulsed power measurements taken at 1 μs pulse width, pulse frequency = 10 kHz, and 0.1% duty cycle.
ote 3: Recovery time represents the transition time from the high-loss state to the low-loss state following the removal of a high-power input. It is defined as the time from the end of the
high-power pulse to the time when insertion loss has returned to within 3 dB of the quiescent (low-power) state.
ote 4: Spike Leakage (ergs) = t
s
x Ps x 10
7
where t
s
is the spike width at the half-power point (in seconds) and P
S
is the maximum spike amplitude in watts.
ote 5: Not detectable under current test conditions described in Note 2.
Table 4. CLA Series Parts – Die Packages
Part Number Typical Top Contact Diameter (mils/mm) Die Drawing
CLA4601-000 1.05/0.027 150–806
CLA4602-000 1.15/0.029 150–806
CLA4603-000 2.00/0.051 149–815
CLA4604-000 1.65/0.042 150–806
CLA4605-000 2.00/0.051 150–813
CLA4606-000 2.25/0.057 149–815
CLA4607-000 3.50/0.089 149–815
CLA4608-000 6.50/0.165 149–815
CLA4609-000 4.00/0.102 150–813
CLA4610-000 2.75/0.070 149–815
CLA4611-000 4.1/0.104 150-801
