1
G3VM-S5
MOS FET Relays
Analog-switching MOS FET Relays in
200-V Load Voltage Series,
SOP Package.
■ Application Examples ■ Terminal Arrangement/Internal
Connections
■ List of Models
* The AC peak and DC value are given for the load voltage.
■ Absolute Maximum Ratings (Ta = 25°C)
■ Electrical Characteristics (Ta = 25°C)
RoHS compliant
Note: The actual product is marked differently from the
image shown here.
• Communication equipment
• Test & Measurement equipment
43
12
OMRON logo
Pin 1 mark
Model name
LOT.No.
932
Mold pin mark *
Note: The actual product is marked differently from the image shown here.
* The indentation in the corner diagonally opposite from the pin 1 mark is from
a pin on the mold.
Package type Contact form Terminals
Load voltage
(peak value) *
Model
Minimum package quantity
Number per tube
Number per tape and reel
SOP4
1a
(SPST-NO)
Surface-mounting Terminals 200 V
G3VM-S5 100 -
G3VM-S5 (TR) -2,500
Item Symbol Rating Unit Measurement conditions
Input
LED forward current IF 50 mA
Note: 1. The dielectric strength between the input and
output was checked by applying voltage
between all pins as a group on the LED side and
all pins as a group on the light-receiving side.
Repetitive peak LED forward current
IFP 1 A 100 µs pulses, 100 pps
LED forward current reduction rate
∆IF/°C −0.5 mA/°CTa ≥ 25°C
LED reverse voltage VR 5V
Connection temperature
TJ 125 °C
Output
Load voltage(AC peak/DC)
VOFF 200 V
Continuous load current(AC peak/DC)
IO 200 mA
ON current reduction rate
∆IO/°C −2.0 mA/°CTa ≥ 25°C
Connection temperature
TJ 125 °C
Dielectric strength between
I/O (See note 1.)
V
I-O 1500 Vrms AC for 1 min
Ambient operating temperature
Ta −40 to +85 °C With no icing or condensation
Ambient storage temperature
Tstg −55 to +100 °C With no icing or condensation
Soldering temperature - 260 °C 10 s
Item Symbol
Minimum
Typical
Maximum
Unit Measurement conditions
Note: 2. Turn-ON and Turn-OFF Times
Input
LED forward voltage VF 1.0 1.15 1.3 V IF = 10 mA
Reverse current IR - - 10 µA VR = 5 V
Capacity between terminals
CT - 30 - pF V = 0, f = 1 MHz
Trigger LED forward current
IFT -13 mA IO = 200 mA
Output
Maximum resistance with output ON
RON -58Ω IF = 5 mA, IO = 200 mA
Current leakage when the relay is open
ILEAK --1.0 µA VOFF = 200 V
Capacity between terminals
COFF - 100 - pF V = 0, f = 1 MHz
Capacity between I/O terminals
CI-O - 0.8 - pF f = 1 MHz, VS = 0 V
Insulation resistance between I/O terminals
RI-O 1000 - - MΩ
V
I-O
= 500 VDC, R
O
H
≤
60 %
Turn-ON time tON -0.61.5ms
I
F = 5 mA, RL = 200 Ω,
V
DD = 20 V (See note 2.)
Turn-OFF time tOFF -0.11.0ms
VOUT
IF
tON tOFF
10%
90%
IF
1
2
4
3
RL
VDD
VOUT
