Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE
ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
Nomex, Raychem, TE Connectivity, and TE Connectivity (logo) are trademarks.
Raychem Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: 1-800-522-6752
Fax: 1-650-361-6297
DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL.
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
© 2007-2017 TE Connectivity Ltd. family of companies. All Rights Reserved.
Title
SPECIFICATION CONTROL DRAWING
SCD
55A8040
WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED,
NORMAL WEIGHT, GENERAL PURPOSE, 600 VOLT
Date
3-14-17
Revision
K
This specification sheet forms a part of the latest issue of Raychem Specification 55A.
CONDUCTOR - ALUMINUM PRIMARY INSULATION - RADIATION-CROSSLINKED,
MODIFIED ETFE
Primary insulation shall be of a contrasting
pigmentation to that of the jacket.
WRAP - BARRIER TAPE JACKET - RADIATION-CROSSLINKED, BRAID - NOMEX, Treated to
(Optional) MODIFIED ETFE prevent frayng
TABLE I. CONSTRUCTION DETAILS
PART NUMBER
1/
WIRE
SIZE
(AWG)
CONDUCTOR
STRANDING
(number x AWG)
DIAMETER OF
STRANDED
CONDUCTOR
(inch)
FINISHED WIRE
MAXIMUM
RESISTANCE
AT 20°C
(ohms/1000 ft.)
DIAMETER
(inch)
MAXIMUM
WEIGHT
(lbs/1000 ft.)
55A8040-8-* 8 41 x 24 .155 ± .005 1.09 .215 ± .014 29.0
55A8040-6-* 6 70 x 24 .206 ± .005 .641 .270 ± .015 44.0
55A8040-4-* 4 107 x 24 .255 ± .007 .427 .320 ± .016 65.8
55A8040-2-* 2 168 x 24 .320 ± .010 .268 .395 ± .018 97.0
55A8040-1-* 1 219 x 24 .358 ± .010 .214 .440 ± .018 125.
55A8040-0-* 0 259 x 24 .408 ± .012 .169 .490 ± .020 149.
55A8040-00-* 00 334 x 24 .466 ± .012 .133 .550 ± .022 189.
55A8040-000-* 000 427 x 24 .523 ± .012 .109 .615 ± .022 227.
55A8040-0000-* 0000 523 x 24 .575 ± .012 .085 .665 ± .022 269.
TABLE II. PERFORMANCE DETAILS
PART NUMBER
1/
BEND TESTING
MANDREL DIAMETER
(inch) (± 3%)
WEIGHT
(lb) (± 3%)
IMMERSION,
LIFE CYCLE, AND
ACCELERATED AGING
COLD
BEND
IMMERSION,
LIFE CYCLE, AND
ACCELERATED AGING
COLD
BEND
55A8040-8-* 3.00 6.00 3.00 6.00
55A8040-6-* 4.00 8.00 3.00 10.0
55A8040-4-* 5.00 10.0 3.00 10.0
55A8040-2-* 6.00 12.0 4.00 15.0
55A8040-1-* 7.00 13.0 4.00 15.0
55A8040-0-* 8.00 14.0 4.00 15.0
55A8040-00-* 9.00 16.0 4.00 15.0
55A8040-000-* 10.0 18.0 4.00 15.0
55A8040-0000-* 12.0 18.0 4.00 15.0
Page 1 of 2