https://www.phoenixcontact.com/us/products/3214322
05/06/2015Page2/6
Fuse modular terminal block-UT 4-PE/L/HESILED 60 (5X20)-3214322
Technical data
General
Surge voltage category III
Insulating material group I
Maximum power dissipation
max. 1.6 W (With single arrangement of the fuse terminal block in the
event of overload)
LED voltage range 30 V AC ... 60 V AC
LED current range 0.4 mA ... 0.86 mA
Connection in acc. with standard IEC 60947-7-2/IEC 60947-7-3
Current 36 A
Additional text the current is determined by the fuse used
Nominal current I
N
28 A
Nominal voltage U
N
500 V
Maximum load current (upper level) 6.3 A
Additional text the current is determined by the fuse used
Connection in acc. with standard IEC 60947-7-2/IEC 60947-7-3
Nominal current I
N
(upper level)
6.3 A
Nominal voltage U
N
60 V
Open side panel nein
Dimensions
Width 6.2 mm
Length 92.7 mm
Height NS 35/7,5 88.9 mm
Height NS 35/15 96.4 mm
Connection data
Note Please observe the current carrying capacity of the DIN rails.
Conductor cross section solid min. 0.14 mm²
Conductor cross section solid max. 6 mm²
Conductor cross section flexible min. 0.14 mm²
Conductor cross section flexible max. 6 mm²
Conductor cross section AWG/kcmil min. 26
Conductor cross section AWG/kcmil max 10
Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm²
Conductor cross section stranded, with ferrule without plastic sleeve max. 4 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm²
2 conductors with same cross section, solid min. 0.14 mm²
2 conductors with same cross section, solid max. 1.5 mm²