Discontinuation
WEBCARDLXWEBCARDLX
PowerAlert Console Launcher
PowerAlert Console Launcher
SNMP Management Accessory Card, SmartPro
or SmartOnline UPS Systems
MODEL NUMBER: SNMPWEBCARD
Operate any compatible SmartPro or SmartOnline UPS as a managed device on your network. Monitor
and control the UPS using an SNMP network management platform, PowerAlert Console Launcher, SSH
or telnet.
Description
The SNMPWEBCARD turns a SmartPro or SmartOnline UPS with an expansion slot into a device you can
manage on your network. By inserting the SNMPWEBCARD into the slot and using the SNMP network
management platform, PowerALert Console Launcher, SSH or telnet, you can monitor and control the
UPS and data in your server room, data center or network closet.
Keep an eye on site electrical data, UPS self-test logs and logged power events, such as blackouts,
brownouts and overvoltages. You can even remotely reboot locked network equipment without disrupting
power to other devices when using the SNMPWEBCARD with controllable outlets or remotely switchable
outlets available on select Tripp Lite UPS systems. You can also use the SNMPWEBCARD to copy the
configuration of a networked UPS and transfer it to another device.
Two-tier access allows two people to log in and monitor or control the UPS, while more than two can
simultaneously view activity. If an electrical or UPS problem occurs on-site, you’ll be notified immediately
via email, SMS or SNMP trap. Real-time clock support maintains current day and date even after a UPS
shutdown. NTP (Network Time Protocol) support enables automatic updates to the real-time clock from an
NTP server.
Multiple protocols are supported, including IPv4, IPv6, SMTP, SNMPv1, SNMPv2c, SNMPv3, Telnet,
Highlights
Enables remote UPS
management via SNMP,
PowerAlert Console Launcher,
SSH or telnet
●
Sends user-configurable alerts
via SNMP, SMS or email
●
Reboots unresponsive
equipment without requiring a
site visit
●
Allows mass configuration and
updating of multiple units
●
Keeps logs of power events,
alerts and electrical data
●
System Requirements
UPS or PDU with
SNMPWEBCARD slot
●
Firmware compatible with
PowerAlert Network Shutdown
Agent v0057 (Windows). It is
NOT compatible with v0054.
●
Package Includes
SNMPWEBCARD SNMP
Management Accessory Card
●
Configuration cable (73-1025)
●
Faceplates
●
Installation Manual
●
1 / 3